By Michael Wright

The Different Strummer

As with our old friend Nigel Tufnel, that more is better goes without saying.  Why play an amp at 10 when you could play at 11?  I’ve bought guitars just because they had 4 pickups.  And I’d for sure be interested in a guitar like this Hagstrom Impala with 8 push-button controls!  Count ‘em, 8! And color-coded!

I find it curious that Hagstrom isn’t better known or regarded by Stateside guitar enthusiasts.  I guess you can say that about most European guitar-makers.  But Hagstrom actually got pretty good distribution here.  Maybe even better than EKO, which somehow ends up being better known (although that’s probably more due to Dan Forte’s—aka Teisco Del Rey—writings than actual familiarity during the 1960s)  But Hagstroms were pretty well made and they actually were among the earliest European guitars to be imported after the War.  In the late ‘50s, with the rising popularity of Folk music, acoustic guitars from Scandinavia were the first imports, guitars made by Landola (Finland) and Bjarton (Sweden) came in as Goyas and Espanas.  In around 1959 those acoustic were followed by the first, short-lived electrics, those wonderful sparkle-plastic covered hollowbody electrics sold under the Goya brand name, made by Hagstrom in Sweden.

Finding a vegematic array of push-buttons on a Hagstrom shouldn’t come as a surprise.  Indeed, those early sparkles had push-buttons.  But when you consider that Hagstrom actually began in the 1930s as an accordion manufacturer.  Accordions have nothing if they don’t have buttons!  American manufacturers hit on the toggle switch early on, but European makers seem to have preferred push-button switching.  Then again, come to think of it, most European guitar-makers started out making accordions!  Except for many of the German makers.  Except for Hohner.

Anyhow, Hagstrom produced some pretty innovative and high quality instruments, although I think their reputation gets a bit tarred by those pretty flimsy vinyl-covered guitars that were their bread and butter through most of the 1960s.  But those early sparkles were pretty interesting.  They had modular pickup assemblies.  You just lifted one configuration out and plugged in a different one, although practically speaking that really only made sense if you were upgrading.  I can’t think of why you’d change out a 4-pickup unit for a 1-pickup unit, since all you had to do was just play one pickup on the 4-pickup configuration, but, hey, it makes for good marketing copy.

            There were guitars like this Impala.  This was a very early neck-through-body guitar made long before that technique became fashionable.  The push-buttons were basically for a variety of tone controls.  The “0” was one of my favorite settings: “off.”  I never really understood why you want to turn your guitar off, but OK.  The 1 button activated the neck pickup, while 2 turned on the bridge unit.  Then there were 3 buttons  for Hi, Mid, and Low, sort of a quasi-EQ presumably with different capacitors.  The Solo button was full out, and Accompaniment was a muted setting for chording.  The sliding lever was a master volume for all the buttons except for knob which was a volume control for when you were in Accompaniment mode.  I love all those buttons but I may be loving a toggle switch more.  Even though the switching is a bit arcane, this is a high quality guitar with a pretty good amount of tonal versatility.

Guitars like the Impala weren’t Hagstrom’s only quality builds or technical innovations.  Later in the 1970s the company commissioned Jimmy D’Aquisto to design a jazz box (dubbed the Jimmy) and they also produced the very nice Swede, a sort of Les Paul-style axe, some of which came outfitted with a Patch 2000 interface pedal made by Ampeg, a pre-MIDI form of synth guitar that combined guitar switches with a foot pedal and was even harder to figure out than the Impala’s push-buttons.  But the Swede/Patch 2000 certainly earned them an A for effort.

Hagstrom, like most other European manufacturers couldn’t survive the Japanese juggernaut of the 1970s and they bit the dust in the early 1980s.  Their labor costs kept going up and up as Europe gradually recovered from the 20^th Century’s hot wars and the political and economic turmoil of the Cold War.  But they did manage to make some significant—or at least some really interesting—contributions to guitar history.  Including guitars with lots of buttons.  Now, if this only had 9 buttons, Nigel would be a happy chappy…

Vegematic Guitars from MyRareGuitars.com

The Different Strummer

It’s curious how wildly tastes can swing in a relatively short period of time.  When, in the 1967 classic movie The Graduate, Murray Hamilton (Mr. Robinson) leans in to advise Dustin Hoffman (Benjamin Braddock) to consider a predictably successful future in “Plastics,” the very concept of “plastic” was loaded with highly negative cultural connotations.  Plastic people were disingenuous, fake, mindless pursuers of a corrupted American Dream that created the Viet Nam War.  Yet only a couple years earlier plastic was viewed as an ideal way to add beauty and attraction to a guitar such as this 1965 Avanti solid-body!

The term “plastic” comes from Greek and more or less means “moldable.”  Moldable natural materials have been used for millennia, but synthetic or man-made plastics date from mid-19^th Century America.  At that time, the economy was shifting from agrarian to industrial.  A part of this shift was increasing demand for consumer goods by larger numbers of people.  Many of these products had traditionally been fashioned from natural materials.  For example, hair combs were carved out of bone.  Tortoise shell used to be, well, tortoise shell!  The problem was that, as demand rose, raw materials became scarcer.  Just one example of how cultural changes affected things: cattle ranchers stopped de-horning their steers, thus decreasing the supply of horn material.

The catalyst for modern plastics was the popularity of billiards in the 19^th Century.  The growing upper middle-class found it necessary to have a billiards room (for the guys to light up cigars after dinner, you know).  Billiard balls were carved out of elephant ivory.  Enormous numbers of pachyderms were slaughtered.  Obviously, this was unsustainable.  In 1863, a contest was promoted offering $10,000 in gold to anyone who could come up with a man-made alternative.  The result was the first celluloid invented by a New York printer named John Wesley Hyatt.  Alas, early celluloid was highly flammable and prone to exploding.  Nevertheless, they eventually got the formula worked out and modern plastics were on their way.

Just when instruments began to be covered in celluloid remains to be elucidated.  However, a good candidate for the first instrument is probably the accordion, which makes sense for this guitar.  Accordion history is far less well documented than that of guitars, but in the 1850s and ‘60s accordion-making developed in and around Castelfidardo, Italy, in the northeast in the Po River delta.  The region also had a guitar-making heritage.  Castelfidardo remains the center of accordion-making to this day.  Accordions came to the U.S. in the early 20^th Century and became popular by the ‘teens primarily through the Italian immigrants Pietro and Guido Deiro, who recorded extensively for Victor.  Sears sold Castelfidardo-brand accordions around this time with glued-on celluloid, including sparkle.  By the 1940s accordion technology had evolved to include covering curved surfaces in celluloid.

In the early 1950s there was an accordion craze among young Baby Boomers—my sister was captivated—but it fizzled out mid-decade.  This left the accordion makers—and importers—sitting with lots of capability and a greatly reduced market.  Fortunately for the accordion makers, the region of Italy where they existed was also home to a guitar-making tradition.  When Baby Boomers started turning to guitars later in the decade and into the 1960s, many accordion makers—EKO most famously (or actually Oliviero Pigini, EKO’s maker)—threw their hats into the guitar ring.  It was only natural that they should hit on covering guitar bodies in celluloid, just like their accordions!

As far as I know, EKO was the first to start making plastic covered guitars in around 1962 or ’63.  This Avanti was imported by European Crafts of Los Angeles I’m guessing around 1965.  European Crafts was importing Italian made solid-bodies at least by December of 1964, most made in Castelfidardo by the Polverini Brothers.  Presumably, this is one of those.  This is actually a pretty serviceable guitar once you’ve set it up right.  There are some amusing features, like the fake truss rod cover (the rod adjusts at the body).  What can I say?  They made accordions, didn’t they?  The pickups are controlled by a 4-way rotary switch that gives you neck, middle, bridge, all.  But really, the story here is plastic meant to look like root beer barrel candy!  Yummy!

Now, there’s nothing I love more than highly figured woods on my guitars, but root beer barrel candy plastic?  What’s not to love?  For better or worse, guitars like this Avanti were kind of yesterday’s news.  They were fine for combos in matching collarless suits with matching guitars.  But Dylan had “gone electric” and folk rock was hot.  And someone was, no doubt, working on the script of The Graduate.  Of course, there’s been a lot of water under the bridge since this Avanti appeared and today we recycle plastic.  So, show me a root beer barrel candy-coated guitar and I’m all in!  Plastics!

Roll Out the Barrel, And We’ll Have a Barrel of Fun! from MyRareGuitars.com

Vintage 1967 EKO Condor Electric Guitar

The first time I laid eyes on this guitar was in the showroom of LoDuca Brothers warehouse in Milwaukee, which was another of those “Temples of Doom” you hear me talk about periodically. LoDuca Brothers were (or was if you consider it a company, not siblings) the American importers and distributors of EKO guitars (actually Rickenbacker handled the West Coast). LoDuca Brothers had its roots in a late 1930s, early ‘40s accordion duo Vaudeville act featuring Thomas and Gaetano (Guy) LoDuca. According to their son, Mickey, as good Italian sons, the brothers handed their earnings over to their father, who paid them an allowance and put some in savings. When they’d amassed a couple grand, they opened the first of what would become a chain of music studios around Milwaukee. As they thrived, they began to import and sell LoDuca brand accordions sourced from Oliviero Pigini of Recanati, Italy, just north of Castelfidardo, a town that is still the hub of accordion manufacturing in Italy.

As we’ve talked about before, accordions were a big fad among young Baby Boomers in the early to mid-1950s. This was good for the LoDucas business. But when the wind was squeezed out of the demand for accordions, it kind of left the LoDucas with empty hands. They played around with importing keyboards—including the actual black and white key assemblies—until, fortuitously, folk music happened and demand for guitars began to pick up toward the end of the 1950s.

Vintage 1967 EKO Condor Electric Guitar

Pigini knew only too well about the drop in sales of accordions in the US, of course. So the company decided to expand into guitar manufacturing. LoDuca Brothers had an accordion distribution network with around 600 outlets and was doing business with Pigini, so they were a natural partner to handle the expansion into guitars.

As far as I know, EKO was the brand name chosen for Pigini’s guitars and didn’t come off another existing line of instruments. I don’t think it was ever used on accordions (though it eventually did get put on some electronic keyboards and drums). Just as with accordions, Pigini would gladly put the brand name of your choice on a batch of guitars, but EKO was their main string moniker. EKO guitars debuted in 1961.

The first EKO guitars were acoustics and among the first customers was Sears. LoDuca had imported a little chord organ for Sears beginning in 1959, so they had an established relationship. The first EKO electric guitars were a pair of plastic-covered solidbodies, the Models 500 and 700, covered in sparkle plastic, plus a range of archtops, introduced in 1962.

From the get-go Pigini relied on input from LoDuca Brothers to develop guitars that would sell in the American market. In this regard LoDuca enlisted a number of professional guitarists from the Milwaukee area, who endorsed EKOs.

Vintage 1967 EKO Condor Electric Guitar

LoDuca and EKO hit the market at a good time. EKO’s biggest year was probably 1967, when this Condor was made. It’s the huge ’67 catalog that most frequently circulates in the paper trade. I fell in love with this the moment I laid eyes on it. I mean, it’s so T-Bird (as in Ford with a porthole) or Edsel (yeah, I loved those, too). That pale pink with the black neck. And four—count ‘em—four pickups. It pretty much screams out for a matching tuxedo. Besides being a looker, this guitar actually plays pretty well, too. It’s light-weight and comfortable. The single-coil pickups aren’t screamers, but they’re beefy enough. You get a nice variety of tones, though not those swell glassy out-of-phase sounds like on a jimmied Strat. Having four on-off switches is darned awkward, but otherwise this is a sweetheart.

So, why was the warehouse this came out of another Temple of Doom? Mainly because of a confluence of events. Demand for guitars in the US began to drop in 1968. Tastes changed. Hendrix, Clapton and Bloomfield were whetting appetites for axes capable of chopping, not matching tuxedos. Then, at some time probably around 1968 or ’69, Oliviero Pigini, who loved fast sports cars, died in a car crash. Anecdotal evidence suggests that EKO’s seasoned wood supply burned up in 1970, but I can’t confirm that. In any case, quality supposedly declined.

In any case, business waned and LoDuca Brothers found itself sitting on a warehouse full of unsold EKO guitars. And there they sat for years. Fast forward and in the 1980s vintage guitar collecting became all the rage. Collectors and dealers got the word and began to mine the trove at bargain prices. Temple of Doom indeed! When I strode in, the pickings were comparatively slim, but there was still plenty of guitar eye candy left, including this two-tone beauty, as fine a sight as any gleaming T-Bird, or maybe a pink Cadillac!

Peachy Keen (Vintage 1967 EKO Condor Electric Guitar) from MyRareGuitars.com

These guitars were imported into the United States during the 1960’s by Milwaukee import company, Deluca Brothers Music. This particular model – The Cobra Series – was a “student” entry level guitar. They were available in single and double pickup 6 string version, mainly in Black, Sunburst or Red. Also in a 12 string version in Sunburst or Red and a 30″ scale Bass in Sunburst. Surprisingly nice necks on these guitars even 50 years later, the body material is extremely lightweight and the guitars are fun to play.

EKO Cobra 6-String Electric Guitar

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

Vintage 1960's EKO Cobra 6-String Electric Guitar (Red)

EKO Cobra 12-String Electric Guitar

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Vintage 1960's EKO Cobra 12-String Electric Guitar (Sunburst)

Back Catalog Memories: 1960’s EKO Cobra Guitars from MyRareGuitars.com

Vintage 1965 Gemelli 195/4/V Electric Guitar

Back in the old days—no, I mean the really old days—expensive guitars might have ivory or even pearl fingerboards. These were pretty rare, of course, limited to either presentation guitars or royal clients. The first plastic to be invented was celluloid in the mid-1800s. Actually this had to do with billiards, not guitars. Like expensive guitar fingerboards, billiard balls were made of elephant ivory. But it was clear to the ball manufacturers that this situation couldn’t last. They sponsored a competition to find a replacement, and celluloid won. Now, it had a problem of being highly explosive, which presents a problem if you’re going to poking sticks at it! Still, it began a whole new industry.

Fortunately for us, engineers figured out the incendiary problem. Just when celluloid began to be used on guitars is unknown. But by the late 1920s manufacturers had learned how to make it in sheets and strips, and it began to be used as pickguards and binding. They also figured out how to make it look like pearl and sparkle gold. These began to appear on guitars. The former we now call pearloid; the latter was known in the guitar trade as “glitter.”

Vintage 1965 Gemelli 195/4/V Electric Guitar

By the Great Depression of the 1930s, pearloid, along with decals (“decalcomania”), became a popular way to spruce up cheap guitar materials and make people feel like they were getting something more than they could really afford. Pearloid was used for pickguards, trim, headplates, fingerboards. By this time “tortoise” celluloid was also common for use in pickguards (yes, real tortoiseshell used to be used).

After the War came the surge of electric guitars and the surge in population known as the Post-War Baby Boom. These two surges crashed together like breaking waves in the early 1960s, with a resulting tsunami of demand for electric guitars. Far more demand than American guitar manufacturers could supply. Some enterprising businessmen turned their gaze East to the inexpensive manufacturing possibilities in reconstruction Japan. Others looked to reconstruction Europe, where mass-manufacturing of guitars was an already established industry. Compared to American standards, costs were relatively inexpensive there, too. Sweden, the Netherlands, Germany, and Italy were all major suppliers of guitars to musically inclined Boomers.

Vintage 1965 Gemelli 195/4/V Electric Guitar

Curiously enough, most of the established European instrument making centers included a variety of instruments, and especially accordions. Fortunately for the latter, there had been an accordion boom in the US during the mid-1950s. After that went bust, they had excess capacity. When the tide guitar demand began to rise in the early 1960s, the accordionistas were in a position to call on the guitar makers up the street to help them ramp up to meet American needs.

And, of course — ta da— accordion makers were highly skilled at working sheet plastic! So, it should come as no surprise that among the first European electric guitars to get to the US were the sparkle-plastic covered Hagstroms from Sweden in around 1958 or so. The demand had yet to emerge. But when it did, Hagstroms were joined by plastic-covered EKO guitars by Oliviero Pigini in around 1963. Others followed.

All of which is a long way around to this Gemelli guitar. Much of Italian guitar making was centered around Castelfidardo, Italy. In fact, there were a whole bunch of makers in that area who supplied guitars during the ‘60s, most making guitars for other distributors using whatever brand name was required. One of them was Benito & Umberto Cingolani, located Recanati not far from the Pigini plant. Among the brands they built was Gemelli.

A number of features make this guitar special. The pearloid plastic fingerboard is an obvious one. Long gone are the days of the simple sheet pearloid. This is a hard, nice, fast surface that plays like a dream. Another is the nifty black to green sunburst finish! These were especially popular on both Italian and English guitars during the ‘60s, especially Burns guitars, though American makers were not especially enamored of the style (Harmony did one at the end of the ‘60s and early ‘70s). . Finally, there’s the way cool push-button controls, a leftover from the accordion days. These give you All, Treble, Treble and Bass, Middle, Bass, and Off. Pretty neat, huh? The guitar is lightweight and the vibrato has a butter touch. Overall, this is a darned good starter guitar!

Plastic-covered guitars didn’t go over all that well in the US and they were gone by around 1966 at the latest. However, in this case, the plastic only enhances what’s a swell little guitar, not putting glitter on a piece of junk.

A Plastic Fantastic Dream (1965 Gemelli 195/4/V Electric Guitar) from MyRareGuitars.com

1982 Daion Savage Power Mark XX Electric Guitar

The event in question was the practice of copying American guitar designs by Japanese manufacturers. The Japanese hit on the copy strategy pretty early on. The American guitar industry was pretty robust when the guitar boom hit in the early 1960s. But it couldn’t meet the total demand of maturing Baby Boomers and the gap was filled by European guitar makers such as EKO and Framus. By 1966 or ’67 the Japanese had begun to copy European guitars that were popular in the US market, most notably the EKO violin guitar (itself just one of many Euro takes on the Gibson EB-0 bass).

1982 Daion Savage Power Mark XX Electric Guitar

The turning point, in a delicious irony, was precipitated by Gibson. Gibson had dominated the high end of electric solidbody guitars with its ‘50s Les Paul models. Glued-in necks on a mahogany body with a carved maple top. Yum, yum! But Gibson got bored with the design in 1961 and changed the Les Paul over to what would become the SG. Contract problems with Les ended the model name soon thereafter. The SG did ok, but not as well as the Les Paul. The times had something to do with it. Gibson made nice with Les and reintroduced the Gibson Les Paul in 1968. The version it chose to resuscitate was the black-finished Les Paul Custom.

What follows is somewhat apocryphal. Meaning there’s no incontrovertible proof. Shiro Arai, the man behind Aria guitars, was at the 1968 NAMM show where the reissue LP Custom was featured. He took one look at it. Hmm. It’s a copy of the old Les Paul. Copy!!!

1982 Daion Savage Power Mark XX Electric Guitar

The first Japanese “copies” of the Les Paul Black Beauty appeared the following year—bolt-on necks and not precise by any means. But it didn’t take long for the notion to blossom. By 1974 at least the Japanese were building copy guitars that were nearly as good as the originals. Certainly as good looking, and a heckuva lot cheaper. Gibson was—understandably—not happy.

In the summer of 1977 Norlin, Gibson’s parent company, sued Elger Guitars, the American arm of Hoshino, owner of the Ibanez brand name, in Philadelphia Federal Court. The charge was trademark infringement, based on the copying of Gibson’s headstock design. The plan was to seriously damage the Japanese makers. You know, sweep into the Summer NAMM show and scoop up the entire Ibanez display. Take that! Of course, here’s where the unintended consequences come in.

1982 Daion Savage Power Mark XX Electric Guitar

First of all, Gibson hadn’t noticed that Ibanez had already changed its headstocks. In an amusing twist, they actually looked more like Guild heads grafted on Gibson guitars! No confiscations. Furthermore, Elger reached an out-of-court settlement agreeing not to copy Gibson headstocks. More importantly, the lawsuit gave Hoshino a kick in the pants toward coming up with new designs that American guitarists wanted anyway. The copy era had run its course. Americans wanted natural-finished guitars made out of exotic woods. The result was Ibanez Musicians, Aria Pro II Rev Sounds, and various very cool Westones. Not to mention Travis Beans and Kramers.

Which brings us back to this guitar, which appeared right in the middle of that natural craze. Daion was a brand that debuted in 1978, part of a collaboration between MusiConics International, Inc. (MCI) of Waco, Texas, best known as the makers of the legendary Guitorgan, and the luthier Hirotsuga Teradaira, a maker who specialized in cedar-topped guitars outfitted with brass nuts and saddles for increased sustain. The most famous product of this liaison was the asymmetrical acoustic-electric Daion Headhunter.

Daion introduced its first solidbody electrics—the Power series—in 1981 or thereabouts. There were two basses (Power Mark X-B, Mark X-B2) and either two or four guitars (Power Mark X, Mark XX, Mark XXV, Mark XXX). The Mark XX shown here (#820397) was the top of the line. This is just spectacular. First of all, it’s a neck-through-body guitar, the neck core consisting of two thick strips of rosewood with a thin piece of maple in the middle sandwiched between four plies of maple, two per side, themselves separated with a thin slice of rosewood. The wings of the body are another sandwich, this time two pieces of nicely figured ash on either side of another layer of rosewood. The beauty of the sandwich notion is that when you carve out a contour, like on the back of the beauty, you reveal the gorgeous rosewood. It would be unthinkable in these days of dwindling rainforest to use this much rosewood on a solidbody! Another law I always obey is when an electric guitar is made out of a good chuck of rosewood: buy it!

Of course there’s also the de-rigueur brass fittings and a pair of coil taps on the ballsy humbuckers. Did I mention the original green alligator hardshell case? This is sweet.

Daion actually produced several other models, including the cool Savage line, but the Power Marks are superfine examples of Japanese lathery flexing its considerable muscles following Gibson’s ill-timed attempt to put the kibosh on Japanese guitar making. They never could have imagined that their efforts to end copying would be so successful yet lead to guitars like this Daion Power Mark XX. Good name. Good law.

Sandwich Time (1982 Daion Savage Power Mark XX Electric Guitar) from MyRareGuitars.com

Below, I lay out the answers, based on the classic traditional surf sound of the Sixties. Whether you want to nail the sound with vintage gear, or whether you are on a budget, you’ll find useful guidelines here.

Surf Guitar Gear Basics

Instrumental surf music has its own distinct sound – influenced by both the natural sounds of waves crashing on the beach, the typically rudimentary skills of its early performers, and technological breakthroughs in amplified guitar technology during the hey-day of surf music, the early 1960s. In short, the key characteristics of the surf guitar sound are a clean tube-amp tone and heavy reverb. Not coincidentally, those sounds are closely associated with Fender musical instruments. Back in the day, all Fender instruments were made in Southern California, just a mountain range away from the Pacific Ocean. Naturally, Fender had a huge impact on the early surf musicians blasting out their instro tunes in the music halls of SoCal.

Surf Guitars

Most early surf bands made use of a full array of Fender gear, beginning with the famous single-coil guitars that still define “the Fender sound.” Dick Dale, the father of surf guitar, played his staccato machine-gun sound with the help of “the Beast” a highly personalized Fender Stratocaster.

Today, the Strat remains a favorite choice for surf guitar slingers. The most popular Fender surf machines, however, are the Jazzmaster and its twangy, shorter-scaled cousin, the Jaguar. While nothing tops a vintage Jazz or Jag dated anywhere from 1958 (the first year of the Jazzmaster) to about 1966 (the venerated “pre-CBS” era, when Fender was still owned and operated by Leo Fender), you’ll have to shell out mucho dinero for the authentic item.

Fender Jazzmaster.. proper surfin’ vibes!

Fortunately, Fender has created excellent reissues of its classic instruments. Most players would agree, Made in America (often designated as “MIA”) vintage reissues of the Jazz and Jag come very close to the sound and mojo of the originals, and can be had new or used for less than a king’s ransom. For those on a budget, the Made in Japan/Crafted In Japan models (often denoted as “CIJ” and “MIJ”) come very close to the feel and tone of the American-made models, at about half the price.

A minority of players seek out other vintage guitars popular among early surf bands. Mosrite guitars, made by California’s Semie Mosely, were made famous by The Ventures – not strictly a surf band, but still a vital group in the pantheon of surf music legends. Other popular surf guitars include single-coil models manufactured by Japanese manufacturer Teisco Del Rey, American-maker Danelectro, and the Italian firm Eko. Plus dozens of Japanese guitars churned out during the 1960s and 1970s.

Any of the recent Eastwood Mosrite Reissue models are a great choice if you want to go down the Ventures route:

Eastwood Sidejack, a great option for surf music

That said, anyone new to the surf sound can get by with most any solid-body electric guitar featuring single-coil pickups. For the economy-minded, a Fender Squier Strat is a good choice. Yamaha also makes some surfy guitars loosely fashioned after the wild SGV models of the late 1960s. Other brands to consider are the Danelectro-style guitars made by Reverend, the retro-60s guitars made by Eastwood, reissue Danelectros, DiPintos, and the many Strat-clones made by just about everyone.

Back in the early 1960s, strings were quite heavy when compared to the light, thin, slinky strings favored on most guitars today. If you want a dedicated surf guitar, as opposed to one set up for playing a wide array of rock music, you’ll want to stock up on the heavier guages – high “E” strings of 11, 12, even 13. The true surf sound was typically played on ribbon-wound or “flat” wound strings; these help reduce string-slide sounds and have a mellower tone than the more common round-would strings. However, this is an item of personal preference; many surf guitar players swear by flat-wounds, while most continue to play the cheaper and more widely available round-wounds.

The Ventures, one of the greatest surf bands ever, played Mosrites

One last note: one other characteristic of the surf sound is whammy bar dips. Not the dive-bombing acrobatics of Eddie Van Halen, but a nice quarter or half-tone warble. Any worthy surf guitar should have a bridge set up to create this sound; used judiciously, they will stay in tune. Hard-bridge guitars, such as most Telecasters, lack this feature, making them less desirable among surf guitar players.

Surf Bass Guitars

Surf music played a big role in the acceptance of the electric bass and the movement away from the standup basses used by Jazz, blues, and rockabilly musicians of the 1950s. The surf players ushered in the era of the electric bass, launching the modern rock bass sound. Of course, the surf bands used Fender basses, both the Precision bass and the Jazz bass. Another popular brand was the Danelectro Longhorn bass, with its distinctive double-cutaway body.

Just as if their guitars, Mosrite basses were also used by surf bands, such as The Ventures. The Eastwood Sidejack Bass 32 is a pretty good choice, if you want something similar:

The Sidejack Bass 32… great choice for surf music

Surf Guitar Amps

Think clean, sparkly treble and a round, clear bass tone. That’s the essence of surf amp sound. The most famous and venerable surf amps are the classic Fender Showman and Dual Showman. These were early amp “heads” intended to be played through Fender amp cabinets, typically with big 15″ JBL D-130F speakers. These setups have mountains of clean headroom, sufficient to spread the sweet surf guitar sound across an entire auditorium of stomp-crazed beach kids looking for some fun on a Saturday night. You can still find a bargain on Showman heads by shopping eBay, but snapping up the matching cabs with JBL speakers will cost you a month’s salary or more.

Fender Bandmaster

Other popular early Fender amps are the Twin Reverb, Deluxe Reverb, Bandmaster, Vibrolux, and Super Reverb. Any of these true vintage Fenders will likely put you deeply in debt. Fortunately, Fender has revived many of its timeless designs, which are available as the reissue series. The ’65 Twin Reverb, the ’65 Twin Reverb Special 15, Custom Vibrolux, and the Deluxe Reverb Reissue are all excellent choices for surf music. If you want to lay out serious dead-presidents, the VibroKing Custom comes with a built-in ’63 Fender Reverb (see “Reverb” section, below), while the new SuperSonic combines the tones of the classic Vibrolux, ’66 Bassman, and modern high-gain amps.

That said, there are many other affordable – and not so affordable – amplifiers from which to choose. For novices who want to play at home, the Fender Blues Junior gets great tube tone. Other good choices are the Fender Blues Deluxe, a 40-watt with great versatility, and its beefier brother, the Fender Blues Deville (also sold as the ‘Hot Rod’ series amps). A bargain-basement amp that has excellent surf tone is the Fender Frontline 25R, a surprisingly warm-sounding solid state amp. Of course, you can play through a classic Marshall stack or Vox AC30 (the amp used by the fab British instrumental band, The Shadows). Anything is possible – just bear in mind, you’ll be straying from the classic surf sound.

Another choice (and this is mainly for guitar players with lucrative careers as doctors, attorneys, business execs, and mafia captains) are boutique amps. Many makers, most notably Kendrick and Victoria, have re-created hand-wired amplifiers based on the classic Fender circuits. You’ll get classic Fender tone without having to worry about the reliability issues that come with owning a 50-year-old piece of electronic gear. Unfortunately, the boutique makers seem to focus largely on the tweed-era Fenders of the 1950s, rather than the black-face amps of the 1960s, when surf guitar ruled. So, some of the boutique amps seem better suited to mildly distorted blues than to crystal-clear surf.

Surf Guitar Reverb

Ahhh, reverb. One of the earliest effects created for guitar, and the essential ingredient of surf sound. Originally intended to create an ambient atmosphere, like a large music hall, reverb came to the fore in surf music with the creation of the Fender Reverb based on the G15 circuit. Turned up midway, they do capture the sounds of amplified music bouncing off the walls at a high school hop. But turn the dwell, tone and mix knobs up past the mid-mark, and you start to get the wonderful resonance of a guitar played at the bottom of a well, or in a long tunnel, or perhaps through the barrel of a breaking wave. Coveted by surf musicians, these original tube reverb units are the standard by which all reverb is compared – and by which most fail.

Basically a stand-alone box, tube reverb works by taking the original guitar signal, pushing it through a series of springs mounted in a box, then recapturing and amplifying the sound again before sending it along to the amplifier. Soon after the creation of the tube reverb effect, Fender began adding reverb to nearly all of its popular amp models; however, most will agree that the reverb effect built into the amp itself is a pale and sickly cousin when compared to a true Fender reverb.

Today, you can buy reissue models of the classic Fender ’63 Reverb, but bear in mind, these are not actual copies of the originals. While the circuits are similar on paper, the newer units have circuit board construction, rather than the hand-wired circuitry of the originals. You can, however, find hand-wired reverbs by boutique makers such as Victoria, Soldano, and Kendrick, all based more-or-less on the original G15 circuit. You can also buy a kit and build your own (Weber Vintage Speaker Technology of Kokomo, Ind., is a good source for such kits).

If you can’t spend the $250 for a used reissue much less the $600 or more you will pay for a vintage Fender reverb or a boutique clone of the original, you can go with a variety of pedals, starting as low as $35 for a Danelectro mini-pedal to about $150 for a Little Lanilei reverb pedal that actually uses a spring reverb tank. Other popular models include the Electro-Harmonix Holy Grail and Holier Grail, the Verbzilla, and the Digitech Digiverb, which all get excellent reverb sounds for just over $100.

Finally, you may find that the reverb in your amp works plenty good. You may not get the sputtering “boosh” sounds of a true Fender Reverb, but you may find that it’s enough reverb for your throbbing versions of ‘Pipeline’ and ‘Miserlou.’ Then again, you might be like surf guitar aficionado Jeff ‘Big Tiki Dude,’ who believes that there is no such thing as too much ‘verb.

Good surfin’!

Post by: Gavin Ehringer

Let’s Go Surfin’: How to Get the Classic Surf Guitar Sound from MyRareGuitars.com