This month we’ll look at a few aspects of getting a good live sound. While this article is mostly aimed at those of us with who have don’t have much or any stage experience, there may be something of interest here for almost anyone.

Last week I had the genuine pleasure of attending a League of Rock ‘dark stage’ rehearsal night at Toronto’s famous Chick’n Deli night club. This was an opportunity for the six bands in the current session to rehearse their three songs on a real stage – and in this case, somewhat unexpectedly, in front of a real audience.

League of Rock is the creation of Terry Moshenberg, a dynamic entrepreneur and experienced marketer and promoter – who also happens to be a guitar playing musician.

Each LOR session, of which there are three per year, some 26 to 30 amateur musicians – ‘regular’ folks, some of whom have never before been in a band let alone performed live – are formed into six ‘bands’ and, over a 12 week period, work up three songs. Each session culminates in a recording date in a pro studio and the final gala gig at a major Toronto live music venue.

So, how did I end up at a LOR gig? Well, Mack Amps is pleased to announce that it is now the official guitar amp sponsor of LOR, Toronto!

Along with meeting a bunch of great people and having a blast, witnessing 18 songs being performed by a diverse group of guitar players who, for the most part, used various Mack amps (2 guys brought their own amps!), was a tremendous live guitar sound learning experience.

Here are some thoughts about what I learned.

The Guitar’s Place In The Stage Mix

I think of live guitar ‘sound’ as being comprised of two concepts: how good is the tone and can it be heard by you and the audience?

Consider what is going on when a typical rock band performs live:

• Drums: A drum kit produces a tremendous amount of sound energy with fundamental frequencies that range from the bass part of the audible frequency spectrum to mid range. Harmonics of fundamental tones reach all the way into the high midrange and even high frequency portions of the spectrum. You might be surprised at how much high frequency sound energy is present in a kick drum thwack not to mention toms!
• Cymbals. Of course, cymbals produce lots of high-mid and high frequency sound energy. However, their fundamental tones are centered in the mid range.
• Bass. True to its name, the bass produces fundamental tones in the bass to mid range frequencies.
• Vocalist. The vocalist is producing mid range fundamentals with high-mid and high frequency harmonics.
• Keyboards. If your band includes keyboards, they can be pumping out sound that spans the entire frequency spectrum from sub-bass to highs.

The guitar’s fundamental tones span bass to mid range frequencies and the guitar’s harmonics add energy in the high-mid range.

If you simplify each instrument’s frequency range to be generally characterized by its fundamental tones you can get a fairly realistic picture of what’s happening on stage:

• Lots of bass and low-mid energy from drums and bass.
• Lots of high-mid and high frequency energy from cymbals, vocals and often keys.
• Lots of mid range energy from low frequency instrument harmonics and lower fundamental tones from vocals and keys.

There is a LOT of competition on stage fighting to be heard!

Obviously, guitars are a critical part of a band’s sound and are known for being heard, but how do you obtain that ideal combination of stellar tone that is easily heard by both you and your audience?

EQing guitars in a recording mix is a topic of many books and is well beyond the scope of this article. However, there are a few simple things that any guitarist can do to get good live sound.

Analyze Your Guitar Tone

Your tone may sound great when you are practicing at home or playing along with recordings. However, it may not translate well to the live stage.

A fairly common characteristic of what I heard the other night is guitar sounds that seemed muffled and lost in the low-mid wash of sound booming from the stage.

In these situations the guitar players usually increased the volume at the amp in an effort to hear themselves, further adding to the general pandemonium going on in the lower half of the audio spectrum.

What to do? Here are two very basic, but critical suggestions:

1. Turn your guitar volume to 10. Many, but not all guitars feature a ‘volume control bypass capacitor’. No, that’s not something from a Star Trek episode, it’s an electronic component wired across a guitar volume control that prevents your tone from becoming muffled (reduction in high midrange frequencies) as the volume is turned down. If your guitar does NOT have one, whenever you turn down its volume your tone will generally lose presence and recede into the mix. In this case keep your guitar’s volume at 10 to help you stand out. If your guitar does have a volume bypass cap, it’s still a good idea for you to have all of your guitar volume pots full up when you hit the stage and adjust your sound before the first song’s count-in. This will ensure that you are tweaking your sound with the most signal possible coming from your guitar and gives you the best chance of avoiding a gear adjustment that will actually fight against getting a good stage sound.
2. Turn your guitar tone to 10. Guitar tone controls have one function: they roll of high and high mid range frequencies. Since we are trying to achieve optimum ‘sound’ – the combination of great tone that is easily heard by you and your audience – and since guitar tone ‘lives’ in the upper and high mid range frequencies, it makes sense to hit the stage with tone on 10. As with guitar volume, this gives you the best opportunity to properly adjust your gear and it ensures that you do not inadvertently roll of the highs and cause your sound to recede into the mix. Having said that, there are times when a tone control adjustment is certainly warranted: for example, removing the ‘ice pick’ quality from some Teles or getting Eric Clapton ‘woman’ tone from a humbucker guitar. But, generally tone on 10 will help you cut through the mix.

3 Ways To Get Clean Electric Guitar Tone On-Stage

The term ‘clean headroom’ is often used, but having spoken to many guitarists over the years there is generally some confusion as to what it means.

The practical definition of clean headroom is the volume level at which your guitar signal starts to become distorted. The volume at which your tone just starts to breakup or overdrive is the point of maximum clean headroom. How loud you can get a clean tone depends on many variables such as how hard you pick, pickup output level, amp design and settings, etc.

There are three ways to achieve a clean tone:

1. Guitar volume 10, amp clean. Your basic sound is clean and, if you use overdrive and distortion it will come from pedals.
2. Guitar volume less than 10, amp dirty. In this case you set up your amp for a distorted tone and roll off your guitar volume to get a clean tone. Your distorted tone is only a flip of the guitar volume away. Note that this contradicts my earlier recommendation to leave your guitar volume on 10. “Switching” from clean to overdrive and distortion via your guitar volume control is a great strategy if your guitar volume pot is set up properly (see above) and your amp is sensitive enough to changes in guitar volume. Some amps do a great job of changing their tone with guitar volume changes and some don’t – check our your amp to see how it responds.
3. Guitar volume 10, amp channel switching. If your amp has multiple channels one is usually adjusted for a clean tone and one for an overdriven or distorted tone.

Any of the above methods of achieving a loud clean tone is valid. The one you choose depends on your gear, the music you play and whether switching tones within a song is a necessity.

Note that a clean tone will most likely have a better chance of cutting through the stage mix. Generally, the balance of upper and high mids will be greater than an overdriven or distorted tone and your guitar sound will be less compressed allowing your picking and playing dynamics to be heard.

Distorted Electric Guitar Tone On-Stage

Whoever came up with the phrase “Less is more” must have been referring to distorted electric guitar tone!

You will likely have heard this before, but some of the heaviest electric guitar tones feature relatively little distortion.

For example, Keith Richards, ACDC, Jimi Hendrix, Jimmy Page, Pete Townshend, etc. have recorded some of the heaviest rock guitar sounds ever – and many of these iconic ‘heavy’ tones are really not all that distorted.

I realize that LOTS of great guitar tones feature LOTS of distortion, but to achieve the best stage guitar sound for classic rock and blues music styles, dialing down the distortion is almost always beneficial.

While there are many flavors of distortion – overdrive, fuzz, etc. – I generally think about it related to two needs: rhythm and lead.

If a song requires a distorted rhythm tone, often referred to as ‘crunch’, the ‘less is more’ credo is critical. Richards and the Young brothers are the masters of getting incredibly juicy, resonant and HEAVY crunch tones that are, when you listen closely, amazingly clean relative to their impact.

The distortion required for lead playing is dependent on the song and the player. However, I believe that the ‘right’ amount of distortion for solos is just enough to produce ‘flow’. What’s flow? It’s that musical moment where your tone is distorted and compressed enough and possesses enough sustain that the player can focus on their performance without having to ‘fight’ their way through a solo.

This may sound kind of esoteric, but I am sure you have wrestled with solos where your tone wasn’t quite there – either there wasn’t enough sustain or not enough distorted breakup and compression. Dialing up the distortion to get to that point of ‘flow’ alleviates the problem, but overdoing it will cause your sound to, once again, recede into the stage mix.

I also believe that the amount of distortion needed to obtain flow varies according to the song. Heavy songs with lots of crunch backing the solo requires more distortion; a much less distorted tone is often the perfect fit for obtaining flow with ‘lighter’ songs.

Having said that, I know there are lots of examples of impossibly distorted solos in otherwise clean songs and clean solos in heavy songs – in those cases the contrast is what works. However, I believe that a good rule of thumb is to use just as much distortion as it takes to get you into flow – and no more.

What happens if you use too much distortion on stage?

Your tone won’t fit the song and will negatively impact the quality of your band’s overall sound and its performance. Part of getting a great stage sound is making sure your audience isn’t cringing even if they can hear you LOUD and clear. Since the primary objective of performing live is to provide your audience with an enjoyable experience, this problem should be avoided at all costs!

Worse yet, using too much distortion can overly compress your tone and, depending on how the distorted tone is EQ’d, there can be a dramatic perceived loss in highs and clarity and you end up not blending in with the song and not being heard properly! I suppose that if your tone is negatively affecting the overall performance, not being heard might be a good thing, but I think you get my point.

How do you easily get the right amount of distortion on stage?

So,this is how to best get a distortion sound on stage and still be heard properly:

1. Crunch. My favorite method of getting good crunch is from an amp – preferably one that features power tube distortion. Richards and the Youngs rely on plugging a great guitar into a great amp and turning it up until they get the tone they want. Although there are lots of overdrive and boost pedals that can get crunch tones, for the most part you will find that amp crunch is more dynamic, resonant and pleasing to the ear. Dynamics are important because a good amp will respond to your picking attack by changing the amount of crunch. Organically altering your distorted tone by playing harder and softer during a song is FUN!
2. Lead. This is where pedals can really come into play. Stomping on a box to elevate your tone for solos is a classic method. However, you can get great amp lead tone by setting your amp for lead distortion and rolling your guitar volume down for clean/crunch and up for solos. Or, if you have a multi-channel amp it is easy to set up rhythm and lead tones.

There are many more aspects of live guitar sound that we haven’t covered. If there is enough interest in this topic I’ll continue next month.

Let me know how you get great live guitar tone by emailing me at Don@MackAmps.com or simply post your reply, below!

Don Mackrill
www.MackAmps.com

Getting Great Guitar Sound On Stage from MyRareGuitars.com

First some quickie suggestions right off the bat for you guys and gals.

Phase 1

1. When using a wah wah and a distortion always have the wah wah before the fuzz box (how’s that for old school?) in your chain. You want to effect your guitar signal before you distort it. When using a clean boost that should be last in your chain right after your distortion units.
2. Use as few pedals as you can. The more effects you use the more your sound suffers. If you are using more than 5 or 6 pedals try using an A/B switch and set up two loops to keep the chain as short as possible.
3. If you like a tight sound, ceramic speakers are a good way to go. In general AlNiCo speakers tend to be a bit more saggy. But there are some Alnico speakers that are clean too, these tend to be the higher quality ones. And as they break in the ceramics tend to be tighter and cleaner.
4. Lower output pickups tend to be thinner eq wise, and subsequently a hotter pickup tends to be darker sounding. If you want to use a lower output pickup for the reason that they reproduce your playing dynamics better, you must use a higher output amp. Again, if your guitar is a high output axe you can use a smaller amp, and still achieve a nice fat sound.
5. Shorter scale guitars make light gauge strings feel extra light, and consequently longer scale guitars make light gauge strings feel a bit heavier. This is why back in the day when light gauge strings were not readily available, guitar players preferred Gibson guitars over Fender.

1962 Fender Telecaster Electric Guitar (Vintage)

Phase 2
Next on the cavalcade of hits, I will give you some examples of typical setups for certain types of music. Remember you can mix and match these suggestions for your signature sound.

Clean Country Sound:
This is a sound made popular by country pickers since the 1960’s. It’s a clean sound, very little if no distortion at all.

• Guitars: Fender Stratocaster, the bridge pickup for a bright twang with a bit less output and fatness then the Tele bridge p/u. You can also get a great albeit a more modern country sound using the between the pickups sounds (2nd and 4th) on the Strat. For all you Eastwood fans check out the Wandre and the Joey Leone Signature Models for a great bunch of aforementioned country sounds.
• Gretsch models w/ DeArmond Dynasonic pickups give you a great country sound with alot of dynamic range for subtle to ear splitting tones. For those of you who want to dabble in some cool country tones try the Eastwood Classic 6 for a very reasonable starter country axe.
• A Gibson thin line arch top like a Byrdland is also a great clean country axe, don’t believe me? Ask Roy Clark and Hank Garland (Mr. Sugarfoot Rag). One of my idols Scotty Moore (of Elvis fame) played an L5 and an ES-295 during his years with the King.
• Amps: The cleaner the amp the better, period. A Twin Reverb comes to mind immediately as well the solid state high wattage steel guitar offerings from Peavey like the Nashville and Session 400. Amps with at least a 12-inch speaker will help you get that twang. If you are the only guitar player in the band consider using an amp with a 15-inch speaker. You can also use a smaller amp at a lower volume with a mike on it.

Gritty Country Sound:
Same guitars choice as above, just crank your amp up. 10 inch speakers are okay for this application. The Marshall TSL Series, Fender Deluxe. Vibrolux, and Super Reverb will make you smile.

Heavy Rock Sound:
Again I remind you I am an old school guy so I say….

• Guitars: Gibson SG w/ humbuckers is my choice for ultimate heavy rock guitar. It cuts and yet is still as fat as your fifth grade Home Ec. teacher. Tony Iommi, Angus Young, and Glen Buxton (the most underrated heavy rock guitar player) are shining examples of what an SG in the hands of a capable axe murderer can do. Gibson Les Paul Customs like Steve Jones and Mick Ronson used to play also kill.
• Those pointy guitars from the 80’s, Jackson, Charvel, Ibanex JEM and ESP’s are all a bit more edgy and hotter then a stock SG or Les Paul.
• I also love the sound of P90 equipped solid body axes for a great crunch sound, maybe a more punky sound is a better explanation. Les Paul Jr.’s ala Johnny Thunders and Leslie West are prime examples of this guitars sound when cranked. I am sure these guys influenced Billy Joe Armstrong in his choice de axe. Again, Eastwood offers some great single coil guitars of this ilk, the P90 Special, Stormbird and JR Elite just to name a few.
  1962 Fender Telecaster Guitar – Sunburst
• Amps: Marshall, Marshall and more Marshall. The JTM 800 is numero uno in my book, as well as the JCM 900 for a more modern shred vibe. I was also impressed with the Carvin stack offerings back in the day. THD, Randall, and Peavey also have really good sounding shred generators in many configurations.

Marshall Guitar Amps

Rock and Alternative Sound:
This is a potpourri of suggestions, please take one and pass the rest back.

• Guitars: Well take your pick, I am just gonna rattle em off….first the off the wall ones. These are the “next big things.” Maybe? Remember Cobain’s JagStang? Gretsch solid bodies from the 70’s and 80’s ugly as your neighbors AMC Gremlin. Silvertone’s and Danelectro’s from the 60’s. Link Wray, Jimmy Page, duh! Kramer’s from the 80’s, Eddie something or other played one of these. Carvin solidbodies from the 80’s. Still a great deal on Ebay. Ovation guitars form the late 60’s and 70’s (the Deacon, the Breadwinner, and Tornado.) The pickups were nasty sounding, but oh so cool. Legit ones. Fender Telecaster, Rickenbacker solid and semi-solid guitars, Gretsch arch tops, Mosrite solidbodies, and Gibson solidbodies guitars w/ P90’s.
• Amps: The Vox AC-30 is a seriously important amp in the history of rock and roll, for a very good reason, it’s an original. History tells us that early Marshall’s are in essence copies of a Fender Tweed Bassman. So the Vox is the only original amp design of the “Big Three”. Best news about that is that it sounds great! The Vox AC-15 is also a slammin’ amp. Portable, strong and ballsy just like my first wife.
• Fender Deluxe Reverb, crank it up and feel the magic. The singularly most versatile amplifier in the history of guitardom. This little dynamo is IMHO the best sounding amp ever made (Blackface models produced from 1964 to 1967).
• The Silvertone/Danelectro Twin Twelve. What a great/cheap amplifier should be. Two twelve inch speakers (usually Jensen’s) a killer tremolo and reverb. Most models I have seen run four 6L6’s in the output section. Although I own an early Danelectro Twin Twelve which runs a duet of 6L6’s that is a great amp. Also any of the Valco made amps will do the trick (Supro, National, Airline, Montgomery Ward).
• There are so many great boutique amps out there that are really well built and versatile. They are expensive, usually very expensive. Also they are tough to try out as many of these amps are not in music stores. Making it hard to test drive them . And if they do have one, that’s the problem they only have one, so you can’t a/b them with your favorite guitar plugged into them. Some of the ones I have either owned or played are Victoria (a tweed Fender vibe), Matchless (some Vox like models). I also really liked the early Bedrock amps that were basically JTM 45 clones.

Getting Your Own Sound with Guitars & Amps from MyRareGuitars.com