But New Jersey had a few other great (albeit minor) amplifier companies of the 60s and 70s. You had, from various divorces from the Ampeg company, Stanley Michael’s great Sano company of amps and, later, Jess Oliver’s line of amps (under his name and briefly, a few rare ones under the “Sam Ash” brand in the late 60s). The solid state Andre amplifiers are a surprisingly good sounding series, founded by former Ampeg troubleshooter and designer Gene Andre. It seems like every great amplifier company in New Jersey had some ties, at some point, to the Ampeg Company.

Every one, except (perhaps, maybe—there’s not much written about them) the Hilgen company. Hilgen, by anecdotal evidence at least, did not make a lot of amps and they didn’t make them for very long. They did, however, make them very well, and they made (however briefly) some stunning looking and sounding guitar amps. Like late 60s and early 70s Sanos, many models of Hilgens sport great “swirl” paint grills reminiscent (surprise) of late 50s Ampegs.

They also sport circuits that could have been (and may have been) Xeroxed from Ampeg schematics.

While everyone in California was making amps with 6V6s and 6L6s, and everyone in Chicago and Michigan was using 6V6s and 6L6s and the occasional EL84 (Lectrolab and Gibson/Kalamazoo), it seemed the Jersey makers alone who were finding a good use for the 7591 output tube (although, Kalamazoo/Gibson DID use this one for a couple of models, notably, the super underrated BASS 30, a twin 10” amp that sings with a guitar).

After a few Jets and Reverberockets rolled off the line with 6V6s in 1964, Everett Hull (head of Ampeg) got complaints from Jazz players (his main clientele) that the amps were breaking up too much. From then on (until the monster early 70s amps that the Rolling Stones made famous), the Ampeg Jet and Reverberocket sported the sturdy (and cleaner, at least for a while longer, headroom-wise) 7591 tube. In between a 6V6 ad a 6L6 in output-wattage, the 7591 turns out (while rock-and-roll-hater Everett Hull spins in his grave) to be a fabulous sounding tube under breakup. In the right circuit (and, as Mack amps designer Don Mackrill so rightly points out, it’s the design, more than any other factor, including the tubes, that defines the tone….still, the tubes play a part and they do have different characteristics), a 7591 is a killer rock and roll tube. Push a Reverberocket past its intended operating point and you have yourself an amp that is just as great sounding (in its own way) as a Blackface Deluxe Reverb.

Unfortunately, the secret is out on the Reverberocket. What cost $350 two years ago and $450 last year is now up to around $600-700. Soon, I won’t be surprised to see Jets and R-Rockets going for a grand. They are amazing sounding amps—built like tanks.

But where does that leave all of us cheap, gear addicted tone freaks? Looking for Hilgens (or Sanos…see my earlier column about the Sano Twin Twelve in the archives…another awesome amp on the cheap), that’s where!

Want a great amp with sweet, blossoming distortion at gig-friendly volume? Want a nice pulsing output-biased tremolo? Deep, lush, jazzy Ampeg-style reverb (capacitor coupled, rather than the Fender transformer style…a different tone altogether…neither better, but both cool)? Want it in a small, relatively light package? Here’s your new (old) amp:

Hilgen Victor Model R2522 Amplifier

The Hilgen “Victor” Model R2522. For the tube geeks among us, this starts with a 5AR4 rectifier before running into a couple of 12AX7s for preamp and reverb send duties. Then comes the only expensive and hard to find (although not impossible) tube—a 7199 for ‘verb recovery. From the factory, it came with a 12AU7 for phase inverter, which I switched out to a 12AY7 for a little more drive on the output tubes. I tried going up to a 12AX7, but that made for too much gain and resulted in a mushy, compromised output. The 12AY7 gives it more heat than stock, but still retains the crisp, tight, articulate character of the amp, as intended.

Hilgen Victor Model R2522 Amplifier

The controls along the top (from L to R): Volume, Tone, Speed (tremolo depth is pre-set), Reverb. And it’s got that cool grill cloth with the odd crest (?!) in the lower right corner.

Up to halfway on the volume, it’s a lush, deep, rich, plumy clean amp (remember, it was designed for Jazz and clean headroom). Over half-way, pushed more that it was supposed to be, the amp comes alive at a sweet rock and blues machine. It’s a loud little amp—probably just a little bit under a Deluxe Reverb for gig volume. The distortion is rich and creamy, with a fair amount of grit, yet it still maintains the crispness and tightness for articulate chords and voicing. This is a fabulous amp, with one of the riches reverbs around. The tremolo is good—but not great. It lacks the depth of a classic Valco or Danelectro tremolo, but it still has a nice tone to it, overall.

Hilgen Victor Model R2522 Amplifier

Originally, the Victor came with a CTS ALNICO speaker. It’s a fine sounding speaker, but I replaced it with a more efficient Celestion Vintage 30 for a little better output and punch for gigs. For a loud show, I’ll run this and a Deluxe Reverb together—a monster sound out of two amps that weigh under 35 lbs each. Can’t beat that.

So, grab a Hilgen now, while they are still affordable. They tend, right now, to go for between $300—400 (though sometimes they can sneak in around $250 if they are poorly listed on eBay). They’re well worth it, work and sound-wise. It’s a beautifully made, hand-wired amp that would go for between two and three grand if it were being made in the boutique market today. Grab one for under $500 while you can. Start looking—they don’t come around often, but they’re well worth the hunt. Get yourself a Hilgen, and drop me a line when you do.

Hilgen Victor Model R2522 Amplifier from MyRareGuitars.com

I pride myself on only keeping equipment that I play, – I don’t have any collector’s-only pieces. Still, I have the cool gear disease. I did some quick math. “Five,” I said.

“What does your wife think?”

“Well, she has three amps,” I said.

“So, you only have two?”

“No,” I said. “Those are in addition to mine. She’s a bass player, so she doesn’t need as many. I have five.” Whoops. I’d forgotten my Deluxe Reverb. “Actually, six.” I said.

This non-guitar player turned to the other player. “How many do you have?”

He shrugged. “Four,” he said. “Right now, I think it’s four.”

The non-player looked confused.

“You need at least three,” I said. “You need your single-ended, your mid-power and your high-powered amps.”

“Right,” my guitar-playing new friend said. The third person shook his head, laughed and walked away.

“They all sound different,” I called after him. “You don’t understand!”

1966 Lectrolab S 400 Guitar Amplifier

But you, dear reader with several amplifiers, you understand. And this month, I sing the praises of another obscure and beautiful amplifier, in this case a 1966 Lectrolab S 400. I’ve seen a few Lectrolabs over the years and they are all pretty cool amps. The 400 series seem to be (and this is based only on observation and scattered information. No one seems to know very much about these) all single-ended small amps with a single EL84 for output and one or two eight inch speakers. The 600 series are more in the 15-20 watt range with either two 6V6’s or two EL84’s (driving a twelve inch speaker), depending on the year. And the 800 series, which I’ve never seen in person, I haven’t been able to find much about, other than that they seem like later versions of the 600’s. The 900 series are El84-equiped heads (very rare).

So who was Lectrolab? As I say, there isn’t a lot of information out there about these. The chassis/labels tend to read “Lectrolab: Sound Projects, Chicago, Illinois/Venice, Florida.” The Chicago location leads some people to speculate that Lectrolab had something to do with Valco. And they do have a sonic texture much like the great Valcos (big midrange, great distortion, slightly dark sound). Yet, the rectifiers in these are usually a 6X4’s (not used much, if at all, in Valcos). The preamp tubes are frequently 6EU7’s (again, not often in Valcos), and the output tubes are often EL84’s (which most American amp companies didn’t use in the 1960’s’Gibson being the notable exception).

So, whoever Lectrolab was, we don’t know. But they probably were their own company, and almost certainly not Valco, or Gibson or any other well-known maker.

1966 Lectrolab S 400 Guitar Amplifier

Whoever made these, they knew how to make an amp sound good. I have never heard a bad sounding 60’s Lectrolab. My S 400 has become my number one practice amplifier. I’m so in love with its tone, I added a ‘line out’ so that I can use it as a preamp for rehearsals and gigs. Coupled with a Magnatone 213, and it’s an awesome gig amp (and you get the added bonus of tremolo and vibrato’rad!).

This S 400 is from late 1966 and had two CTS 8″ alnico speakers. It’s got the 6X4 rectifier, a 6EU7 for the preamp and a single EL84 for output A 6AU6 takes care of the deep, pulsing tremolo. The control panel has four knobs: Volume, Tone and Speed & Intensity for the tremolo. This is a superb recording amp’a rich, complex overdriven tone that sounds huge with a mic. It reacts really well to the picking attack and cleans up as you roll off the volume. The tremolo is very musical and thick. For a small practice amp, it has a very nice bottom. With an overdrive pedal, it thickens and deepens even more and nails tones from the early 50’s Hubert Sumlin to the early 70’s Ronnie Wood Faces’ tone (one of the great, underrated guitar tones of the 70’s).

If you can find an original 60’s Lectrolab, you should snatch it up. I’ve played this next to a Supro Twin Eight and it held its own (and the Valco-made Supro Twin Eight is an awesome little amp). The twin eight inch speakers sound much fuller than your traditional single eight (like a Champ), and it’s got a superb tone for guitar or harp. A hard-to-find sleeper of an amp, but worth the hunt. And happy hunting!

1966 Lectrolab S 400 Guitar Amplifier from MyRareGuitars.com