Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

Inevitably there’s always an earlier “earliest,” but the earliest amp-in-case I know of was built by Daniel when he was working for Epiphone in around 1936. Nathan I. Daniel was a young electronics wizard who was discovered in the early 1930s by Epiphone’s head engineer Herb Sunshine building amplifiers in the basement of a New York department store (back when department stores really had departments and they did things). In 1935 the Epiphone Banjo Company changed its name to Epiphone and introduced a line of electric guitars and amplifiers called Electraphones, which was almost immediately changed to Electar. These included electric Spanish archtop guitars, Hawaiian lap steels, and little amplifiers designed and built by Nat Daniel. In 1936 Epiphone offered its Electar Model C Hawaiian guitar with an amp built into the case, designed by our friend Nat. For some reason, it didn’t go over very well, and the amp was quickly separated out into the Model C amplifier.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

In 1938 National-Dobro revisited the idea, introducing the Supro 60 Electric Combination and the Portable Supro 70 Electric Combination. Both of these featured a little pearloid-covered Supro Electric Hawaiian Guitar tucked into an amp in case unit. I don’t think any of these earl amp-in-case designs did particularly well, but then there was something called the Great Depression going on, which had to have an effect on sales.

Obviously, Daniel thought the idea was good enough. Daniel worked for Epiphone until 1942. After the War Daniel opened his own plant, Danelectro, in Red Bank, NJ, mainly making guitars and amps for Sears and Montgomery Ward, badged Silvertone and Airline, respectively. They began selling Danelectro-branded guitars and amps in around 1954. People throw the term around all too often—and ignorantly—these days, but those ‘50s and ‘60s Danos were truly iconic.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

And maybe the most iconic of Danelectros were the Silvertone Amp-in-Cases made for Sears beginning in 1962. The first were the smaller black-sparkle-finished Masonite one-pickup No. 1448s with an 18-fret fingerboard and a small 3-watt, 6” speaker tube amp built into the case. These were followed in 1963 by the full-size red-sparkle-finished Masonite two-pickup guitars with a 5-watt, 8” speaker tube amp, the No. 1449.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

Let me get this off my chest. Something’s “iconic” when it represents something bigger than itself. “Iconic” does not mean, as modern advertising copywriters throw it around everywhere these days, “his best album,” or, more often, “very famous” or “extremely popular.” Icons are like symbols or metaphors with greater meaning attached, signaling a bigger message or concept. These amp-in-case guitars are icons because they stand for a whole generation and the changes in American culture that were transpiring in the early ‘60s. They were targeted at maturing Baby Boomers who were doing Beach Blanket Bingo with Annette from the Mickey Mouse Club (or, more likely, imagining that they were), switching from Folk to surf rock, starting bands in their suddenly suburban garages. A population on the go, on brand new Interstate superhighways. See the U.S.A. in your Chevrolet. Well, you get the point. I’ll be quiet.

As with everyone else in the ‘60s, Danelectro got bought out in 1966, here by entertainment giant MCA. Whether due to the ownership change or coincidence, the Dano line was shuffled. The two-pickup 1449 was renumbered to 1457 and a bunch of new models debuted. While the amp-in-case concept seemed to continue to 1969, it was no long the iconic versions we know and love.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

I’ve never played a 1448, but I’ve played this 1457 and the amp is surprisingly good. The 8” speaker and tube output have really sweet tone and really decent volume, more than you’d expect. I can’t say the guitar knocks my socks off, but as primitive as it is, it plays fine and it’s pretty good for a few choruses of “Walk, Don’t Run” and “Apache.” These are pure guitar fun! And, yes, they are iconic…

Garage-Band Dream Machine (Vintage 1964 Silvertone 1457 Guitar with Amp-in-Case) from MyRareGuitars.com

While I spend most of the time in this column writing about very cool pieces that came as they are from budget factories in the 60’s, sometimes a piece begs for modification. Sometimes (adding a Bigsby on anything I can, for instance), the mod is minimal and reversible. Sometimes, a beat up guitar or amp shows up begging for more than a simple mod and they become a kind of Frankenstein’s Monster. Case in point: this Silvertone (Danelectro-made) 1448 (i.e., the one pickup “Amp in Case” guitar).

Danelectro 1448 Electric Guitar Project (Before)

As you can see in the “before” pictures, this one came with no electronics, a smashed in Masonite top and years of major neglect. I grabbed it off Craig’s list for $50, figuring I could at least use the neck. But then, other than the smashed top and no electronics, it seemed like it could be an interesting project on its own—not just a parts donor. What was there to work with/keep? A short but good list:

• One good neck—with Brazilian rosewood we can’t get anymore. Odd to see on such a low rent “cheap” guitar. But Danelectro necks were incredibly study and stayed very straight—which is good, since they didn’t have truss rods, after all. And, it may seem minor, but Dano’s aluminum nut contributes to the tone and is a very cool part.
• One set of tuners. The Dano/Silvertone open back key tuners are not the best ever made but they actually hold tune of the guitar is set up well.
• Original Dano bridge, with the “semi” (emphasis on semi) adjustable rosewood slab for intonation. Or something kinda close to intonation.
• The back of the original guitar and the pieces of wood that all hardware would/could anchor in to. I’m no expert on Danelectros, but the wood used in the Amp-in-Case models (the hollow ones, at any rate, before the solid wood versions of 67 and 68, after the MCA takeover) is usually quoted as pine or poplar. In any case, there’s not much wood in there—enough to anchor a bridge and to hold down the Masonite top.

So what did I need? Electronics and a new top. I had the cracked and beaten old Masonite top, so I used it as a template to cut a new top.

My options were to restore it and find some old Danelectro pickup, if I wanted to keep it original. OR, I could add two lipsticks and make it a custom job, while retaining the materials of the originals.

Or, the option I went with, I could make it a total one-off custom job. A buddy of mine owns a custom car shop and he was headed to a junkyard and then a metal yard and asked if I wanted to come along. Figuring a day at a junkyard and a sheet metal shop were more fun than a day of working on a book, I jumped at the chance.

Along with a bunch of crap I probably didn’t need, I left the yard that day with a nice sheet of brushed aluminum. I used the old, broken top as a template and cut the meal the shape of the top of the guitar. Then I ground down the sides, so no metal would come sharp off the edges.

Danelectro 1448 Electric Guitar Project (After)

On the old Danelectro body, there was about a ¼ inch of wood—perfect for mounting the new metal top with some sheet metal screws, which gave it a cool (to me, at least) industrial look.

Danelectro 1448 Electric Guitar Project (After)

Now for electronics. The first version had some top-mounted old DeArmond Silverfoils off an old Harmony that was broken beyond repair. These sounded ok, but the look wasn’t quite right. So, next, I took off the metal top and cut out its center and mounted a modified after-market loaded Stratocaster pick guard. This took some trimming of the pick guard so it would fit the top properly but, once it did, it looked pretty snazzy. The meal also offered some of the best shielding I’ve EVER heard on a Strat-style guitar. The single coils sounded great with almost no single coil hum or buzz—not even when standing under neon sage lights. Go figure.

And the best thing? Something odd happened when I put the Strat electronics onto the Dano body and neck: the tone became a strange hybrid of both guitars. It sounded sort of like a Strat, but the short scale neck, along with the odd bridge and aluminum nut and (probably the biggest factor) the hollowed-out body made it sound different than any Strat I’d ever heard. It had the twangy jangle and snap of a Dano, but higher output on the pickups. A very cool combo—all for under $100 in parts and a little fun work.

If you’ve got a busted up old Danlelectro, it’s a modification/custom job I’d highly recommend. You’ll have the only one on your block, and it’ll sound pretty darn good, too. Happy hod-rodding!

Odd’s & Mod’s from MyRareGuitars.com