While I spend most of the time in this column writing about very cool pieces that came as they are from budget factories in the 60’s, sometimes a piece begs for modification. Sometimes (adding a Bigsby on anything I can, for instance), the mod is minimal and reversible. Sometimes, a beat up guitar or amp shows up begging for more than a simple mod and they become a kind of Frankenstein’s Monster. Case in point: this Silvertone (Danelectro-made) 1448 (i.e., the one pickup “Amp in Case” guitar).

Danelectro 1448 Electric Guitar Project (Before)

As you can see in the “before” pictures, this one came with no electronics, a smashed in Masonite top and years of major neglect. I grabbed it off Craig’s list for $50, figuring I could at least use the neck. But then, other than the smashed top and no electronics, it seemed like it could be an interesting project on its own—not just a parts donor. What was there to work with/keep? A short but good list:

• One good neck—with Brazilian rosewood we can’t get anymore. Odd to see on such a low rent “cheap” guitar. But Danelectro necks were incredibly study and stayed very straight—which is good, since they didn’t have truss rods, after all. And, it may seem minor, but Dano’s aluminum nut contributes to the tone and is a very cool part.
• One set of tuners. The Dano/Silvertone open back key tuners are not the best ever made but they actually hold tune of the guitar is set up well.
• Original Dano bridge, with the “semi” (emphasis on semi) adjustable rosewood slab for intonation. Or something kinda close to intonation.
• The back of the original guitar and the pieces of wood that all hardware would/could anchor in to. I’m no expert on Danelectros, but the wood used in the Amp-in-Case models (the hollow ones, at any rate, before the solid wood versions of 67 and 68, after the MCA takeover) is usually quoted as pine or poplar. In any case, there’s not much wood in there—enough to anchor a bridge and to hold down the Masonite top.

So what did I need? Electronics and a new top. I had the cracked and beaten old Masonite top, so I used it as a template to cut a new top.

My options were to restore it and find some old Danelectro pickup, if I wanted to keep it original. OR, I could add two lipsticks and make it a custom job, while retaining the materials of the originals.

Or, the option I went with, I could make it a total one-off custom job. A buddy of mine owns a custom car shop and he was headed to a junkyard and then a metal yard and asked if I wanted to come along. Figuring a day at a junkyard and a sheet metal shop were more fun than a day of working on a book, I jumped at the chance.

Along with a bunch of crap I probably didn’t need, I left the yard that day with a nice sheet of brushed aluminum. I used the old, broken top as a template and cut the meal the shape of the top of the guitar. Then I ground down the sides, so no metal would come sharp off the edges.

Danelectro 1448 Electric Guitar Project (After)

On the old Danelectro body, there was about a ¼ inch of wood—perfect for mounting the new metal top with some sheet metal screws, which gave it a cool (to me, at least) industrial look.

Danelectro 1448 Electric Guitar Project (After)

Now for electronics. The first version had some top-mounted old DeArmond Silverfoils off an old Harmony that was broken beyond repair. These sounded ok, but the look wasn’t quite right. So, next, I took off the metal top and cut out its center and mounted a modified after-market loaded Stratocaster pick guard. This took some trimming of the pick guard so it would fit the top properly but, once it did, it looked pretty snazzy. The meal also offered some of the best shielding I’ve EVER heard on a Strat-style guitar. The single coils sounded great with almost no single coil hum or buzz—not even when standing under neon sage lights. Go figure.

And the best thing? Something odd happened when I put the Strat electronics onto the Dano body and neck: the tone became a strange hybrid of both guitars. It sounded sort of like a Strat, but the short scale neck, along with the odd bridge and aluminum nut and (probably the biggest factor) the hollowed-out body made it sound different than any Strat I’d ever heard. It had the twangy jangle and snap of a Dano, but higher output on the pickups. A very cool combo—all for under $100 in parts and a little fun work.

If you’ve got a busted up old Danlelectro, it’s a modification/custom job I’d highly recommend. You’ll have the only one on your block, and it’ll sound pretty darn good, too. Happy hod-rodding!

Odd’s & Mod’s from MyRareGuitars.com

Sears Catalog: Silvertone Guitars from Sears

Sears began selling a selection of electric guitars and amps in the fifties, but it is the 1960s that the company sold most of its more popular models. Silvertone was the house name used by Sears for their instruments but these were actually made for Sears by several manufactures including Danelectro, Harmony and Kay. Of course, Sears had their low end and their high end instruments but for the most part they sold some really great guitars and amps at comparatively budget prices. A Fender Strat in 1964 cost $275 compared to the most expensive Silvertone guitar of that time at $199 including case. Putting things in perspective with inflation though, even a guitar costing $100 in the mid 60s would run you a bit over $600 today.

We were all very happy to have our first guitar but play in a band with a Silvertone wasn’t always considered “cool” and most of us got rid of our Sears gear in favor of something else has soon has we had enough money. And, most of us now really regret doing so. In the last several years Silvertones have enjoyed a boom in popularity among both collectors and performers. There are whole web communities devoted to Silvertone instruments. And, as it goes, availability for these instruments is declining while prices for them are escalating.

Sears Silvertone Guitars 1963 Catalog

Opening the pages that feature guitars and amps from a Sears 1963 Fall & Winter catalog reveal a virtual vintage wonderland. The top of the page shows the two infamous Danelectro made guitars with “Amp-In-Case” models 1448 (single pickup) and 1449 (double pickup). These Mosrite shaped guitars had the chambered bodies, lipstick pickups, stacked tone & volume controls and were constructed of masonite. The tube powered amps built into the case were 3 and 5 watts with 5 inch and 8 inch speakers respectively. The larger amp even had tremolo and both shipped with a “How To Play” 45 rpm record. These sold for $67.95 and $99.95 in 1963. Today, a single pickup model in rough but working condition can run around $300. The double pickup model if near mint can cost well over a grand.

Several other guitars are below the Danelectro models including the popular Harmony made “Jupiter” model #1423 at $79.95 and the two Harmony “Rocket” like semi hollowbody models. The double pickup model # 1446 with black finish sold for $149.95 and the Silvertone flagship model # 1454 in red sunburst sold for $189.95 including case and featured 3 DeArmond pickups with separate on/off toggles for each. Both of these models were also equipped with a genuine Bigsby vibrato. One of the 1454 models in good condition recently sold on EBAY for over $800, still a good buy!

In addition to the Danelectro U1 bass guitar model #1444 at $79.95 with case, the page opposite the guitars features the wonderful tube powered Danelectro amps. These run from the little 3 watt “Meteor” amp #1430 at $22.95 to the monster 120 watt half stack with 6 -10 inch Jensen speakers, tremolo and an unusable reverb selling for $239.95. This model #1485 is the one made popular by Jack White of the White Stripes. Also on this page is the 15 watt combo with a 12 inch speaker # 1482 at $68.95 and the bass amp #1483 with 23 watts and a 15 inch Jensen. And then there is the most popular model, the piggy-back 1484 at $149.95 with 60 watts, two channels and two 12 inch Jensens. One of these in good condition can be had today for between $450 and $700.

We all know that regardless of how much you spend on a new guitar, it is not going to sound quite like a 40 year old instrument. If you want a good vintage guitar and don’t want to take out a second mortgage to get one, Silvertones are a good choice. Collectors looking for s Silvertone in near mint condition should be ready to get deep into their pockets. However, if you are actually looking for a guitar to play and/or record with and you are not to concerned with cosmetic issues, about $200 will land you any number of nice Silvertone models. Just keep an eye on the late night auctions and frequently check out the pawn shops and garage sales. If you are a serious musician you should plan on possible replacing the tuning gears and maybe the bridge as these usually were sub-standard on even the most expensive models. If you going to gig with your vintage Silvertone, at least buy a descent case. The stock cases for Silvertone were made of chipboard. If you are one of us that owned a Silvertone and sold or gave it away just remember the words of Joni Mitchell, “Don’t it always seem to go that you don’t know what you got till its gone”.

Post by: Tom Bergey

In Praise of Sears Silvertone Guitars from MyRareGuitars.com