Vintage 1967 Standel Custom Model 202 Electric Guitar (Red)

Standel was originally founded by Bob Crooks of Temple City, CA (a northern suburb of L.A.), in 1953 to make high-end tube amplifiers. The company describes itself as a “boutique” manufacturer, meaning it was basically a custom shop. Transistors—which can amplify an electrical signal in a way that’s analogous (!) to tubes—were invented around the same time, but it took some time for them to be applied to musical instrument amplification. I’m no amp expert, but the earliest application of transistors to guitar amps I’ve encountered was by Kay and its Vanguard series that debuted in 1963. Bud Ross, in Chanute, KS, built a reputation for hot-rodding amps by putting tuck-and-roll vinyl on them, and, in 1965, produced a transistorized amplifier that he took to NAMM and Kustom amplifiers—also “big” in both senses of the word—were off and running. I don’t know when Standel embraced the new solid-state technology, but it wasn’t long thereafter.

Kustom, like Standel, would go on to produce—or really commission—its own line of guitars. Exactly when Standel introduced its first guitars is a mystery remaining to be solved. Likewise, who made most of Standel’s guitars also remains to be elucidated. By 1969, at least, Standel was sourcing its guitars from legendary luthier Sam Koontz in New Jersey. This Standel Custom guitar is from before that arrangement.

Vintage 1967 Standel Custom Model 202 Electric Guitar (Red)

Pretty much inspired by the Country-Western bands that congregated in and around Bakersfield, CA, a whole bunch of guitarmakers sprang up in Southern California, including Semie Moseley and others. Standel did sell some solidbody guitars with a tell-tale German carve around the top that I suspect might have been built for them by Semie. But Crooks apparently preferred hollowbodies, since most Standels are made that way.

Looking at the Southern California guitarmaker landscape at the time—excluding Fender and Rickenbacker, of course—the most likely source for this guitar is Murph. This looks for all the world like a Murph Gemini. Murph guitars were made in another northern L.A. suburb of San Fernando, CA, by Thomas Patrick Murphy from 1965-67, mainly as a vehicle to help promote the pop music act put together by his children. The best known models were the Squier and a heart-shaped Satellite that Dan Forte (aka Teisco del Rey) loves to feature. The Gemini was a thinline hollowbody with a pair of f-holes. The Murph Satellite had a headstock with a little Woody Woodpecker peak at the tip. Visit www.murphguitars.com for more information on Murph guitars.

Vintage 1967 Standel Custom Model 202 Electric Guitar (Red)

You can’t just look at a Murph and this Standel and say “Aha.” There are both similarities and differences. In addition to the similar body shape, the Standel head shows its own resemblance to Mr. Woodpecker. Murphs had more than 10 coats of paint; this appears to be plastic-covered, but could be really just very thickly painted. Both lines had 3-bolt necks. The Gemini had a similarly shaped pickguard with extensions up under the pickups, although these pickup covers are unlike any Murphs. The bridge and vibrato are also different. The Murph Gemini used a threeway toggle, but the Squier used a sliding switch, as here. The two biggest differences are the presence of an elevated “belly on the top,” yielding a mild German carve, sort of. Murphs had flat tops. Lastly, Murphs did not have zero frets. Of course, Standel could have deliberately sourced hardware from a different supplier just to make their guitars different.

So, like those annoying History Channel shows where you sit through an hour to find out that they can’t really prove that the wreck they’re exploring really is the Santa Maria or not, we can’t say for sure that Murph made this Standel. If they did, that would place it somewhere between 1965 and 1967, probably closer to the latter. If Murph did supply Standel’s guitars, then Murph’s demise in 1967 might explain why Standel switched to Sam Koontz a year or two later.

All Standel guitars appear to be quite rare. Until we find an example from another known maker that’s identical, origins will never be conclusive. Who knows? We could even find out that, for awhile, at least, Standel did, in fact, actually build its own guitars! And, for the record, give me a small amp any day!

All Amped Up (Vintage 1967 Standel Custom Model 202 Electric Guitar) from MyRareGuitars.com

Vintage 1966 Standel Model 101 Custom Deluxe Electric Guitar

Fast forward to the go-go ‘80s. Not about stocks or dancing. Go-go because I was buying guitars hand over fist. Weird guitars. Mystery guitars. One of those guitars snared in my trap was this Standel. I held back at first because there was some damage to the pickguard near the jack and I had no idea what this thing was. But plastic can be fixed, right? Once I started looking into this guitar, I was glad I didn’t pass.

Roll the tape further forward and I still don’t know much definitively about this particular guitar. Standel was begun as a tube amp company by Bob Crooks in Temple City, California, near Los Angeles, in 1953. The solid-state amps came in around 1965. As indicated, he was pretty successful, so it was a logical next step to cash in on the guitar boom and introduce a line of guitars. In around 1961 or 1962 Crooks approached a young Semie Moseley, who’d been making waves hot-rodding the guitars of local Country-Western stars, and asked him to design a guitar that was “as close to being a Fender as possible without being a Fender.” Moseley said sure, grabbed a Strat, flipped it over and traced the outline upside down. Voila, the first Standel guitar! Moseley build about 25 of these guitars for Standel, but the project languished for reasons unknown. It was this design that became the legendary Mosrite Ventures guitars of 1963.

Vintage 1966 Standel Model 101 Custom Deluxe Electric Guitar

Following the brief association with Moseley, Crooks began selling Dobros made in El Monte, California, by Emil and Rudy Dopyera, who came out of retirement to revive Dobro brand resonator guitars. That lasted until 1965 when Semie Moseley purchased Dobro. That same year saw Standel’s association with former Mosrite employee Joe Hall, the man who made the famous Hallmark guitars. These were pretty much Mosrite knock-offs. It is entirely possible this guitar is one of those; the CTS pot code is 137 6532, dating it to August of ’65. Some reports have Crooks getting some guitars from another guitarmaker named Bill Gruggett of Bakersfield, California.

After the brief stint with Hall, Crooks turned eastward to the Harptone Manufacturing Corporation in Newark, New Jersey. Harptone is still known today as a manufacturer of high-quality hardshell cases, but during the ‘60s they also did some guitarmaking (they’d done some before World War II, as well). Their chief luthier was the somewhat eccentric Sam Koontz. Koontz built custom-made archtops and ran the set-up and repair functions at Philadelphia Music Company, the principal importer of German-made Framus guitars. From around 1966 until around 1969 Harptone/Koontz built a variety of interesting, mainly thinline hollowbodies carrying the Standel brand.

Vintage 1966 Standel Model 101 Custom Deluxe Electric Guitar

But this is not about them. It’s about this odd guitar. Obviously, this is kind of a cross between a Burns Bison and a Mosrite Ventures. A lot of features are clearly Mosrite, including the German carve top and zero fret, though Koontz used these, too. This is a heavy guitar, probably made of mahogany, though it could be maple. The single-coil pickups look a lot like those made by Micro-Frets, but there’s no reason to think there’s a connection. They are pretty good pickups, with 3.88 kO of output. But check this out. They are epoxy potted. Now, who did that? Another fellow with New York/New Jersey connections, Dan Armstrong. Could he have done these? Dunno. These are replacement knobs, by the way, though everything else is original.

Other curious characteristic include a neck-tilt adjustment and two sets of volume/tone controls. The red switch lets you toggle between them. I guess that’s so you can pre-set them for lead/rhythm. The neck is nice and thin, but with a round profile that gives it a feeling of heft. The tuners are actually Grovers.

So, made by Moseley? Timing wrong. By John Hall? Bill Gruggett? Who knows? But probably not. By Sam Koontz? Most likely, though he didn’t do much with solids. Help from Dan Armstrong? Tantalizing, but unknown. In any case, despite its goofy looks, this is actually a pretty good quality guitar. Definitely a middle-level-plus axe with some professional features. Perfect for “Walk, Don’t Run” and “Pipeline.” Through solid-state or tubes, your choice! And even with the spotty pedigree a way cool blast from the past! Glad I grabbed it when I had the chance…

Hey Man, What’s That Sound? (1966 Standel 101 Custom Deluxe Electric Guitar) from MyRareGuitars.com

Below, I lay out the answers, based on the classic traditional surf sound of the Sixties. Whether you want to nail the sound with vintage gear, or whether you are on a budget, you’ll find useful guidelines here.

Surf Guitar Gear Basics

Instrumental surf music has its own distinct sound – influenced by both the natural sounds of waves crashing on the beach, the typically rudimentary skills of its early performers, and technological breakthroughs in amplified guitar technology during the hey-day of surf music, the early 1960s. In short, the key characteristics of the surf guitar sound are a clean tube-amp tone and heavy reverb. Not coincidentally, those sounds are closely associated with Fender musical instruments. Back in the day, all Fender instruments were made in Southern California, just a mountain range away from the Pacific Ocean. Naturally, Fender had a huge impact on the early surf musicians blasting out their instro tunes in the music halls of SoCal.

Surf Guitars

Most early surf bands made use of a full array of Fender gear, beginning with the famous single-coil guitars that still define “the Fender sound.” Dick Dale, the father of surf guitar, played his staccato machine-gun sound with the help of “the Beast” a highly personalized Fender Stratocaster.

Today, the Strat remains a favorite choice for surf guitar slingers. The most popular Fender surf machines, however, are the Jazzmaster and its twangy, shorter-scaled cousin, the Jaguar. While nothing tops a vintage Jazz or Jag dated anywhere from 1958 (the first year of the Jazzmaster) to about 1966 (the venerated “pre-CBS” era, when Fender was still owned and operated by Leo Fender), you’ll have to shell out mucho dinero for the authentic item.

Fender Jazzmaster.. proper surfin’ vibes!

Fortunately, Fender has created excellent reissues of its classic instruments. Most players would agree, Made in America (often designated as “MIA”) vintage reissues of the Jazz and Jag come very close to the sound and mojo of the originals, and can be had new or used for less than a king’s ransom. For those on a budget, the Made in Japan/Crafted In Japan models (often denoted as “CIJ” and “MIJ”) come very close to the feel and tone of the American-made models, at about half the price.

A minority of players seek out other vintage guitars popular among early surf bands. Mosrite guitars, made by California’s Semie Mosely, were made famous by The Ventures – not strictly a surf band, but still a vital group in the pantheon of surf music legends. Other popular surf guitars include single-coil models manufactured by Japanese manufacturer Teisco Del Rey, American-maker Danelectro, and the Italian firm Eko. Plus dozens of Japanese guitars churned out during the 1960s and 1970s.

Any of the recent Eastwood Mosrite Reissue models are a great choice if you want to go down the Ventures route:

Eastwood Sidejack, a great option for surf music

That said, anyone new to the surf sound can get by with most any solid-body electric guitar featuring single-coil pickups. For the economy-minded, a Fender Squier Strat is a good choice. Yamaha also makes some surfy guitars loosely fashioned after the wild SGV models of the late 1960s. Other brands to consider are the Danelectro-style guitars made by Reverend, the retro-60s guitars made by Eastwood, reissue Danelectros, DiPintos, and the many Strat-clones made by just about everyone.

Back in the early 1960s, strings were quite heavy when compared to the light, thin, slinky strings favored on most guitars today. If you want a dedicated surf guitar, as opposed to one set up for playing a wide array of rock music, you’ll want to stock up on the heavier guages – high “E” strings of 11, 12, even 13. The true surf sound was typically played on ribbon-wound or “flat” wound strings; these help reduce string-slide sounds and have a mellower tone than the more common round-would strings. However, this is an item of personal preference; many surf guitar players swear by flat-wounds, while most continue to play the cheaper and more widely available round-wounds.

The Ventures, one of the greatest surf bands ever, played Mosrites

One last note: one other characteristic of the surf sound is whammy bar dips. Not the dive-bombing acrobatics of Eddie Van Halen, but a nice quarter or half-tone warble. Any worthy surf guitar should have a bridge set up to create this sound; used judiciously, they will stay in tune. Hard-bridge guitars, such as most Telecasters, lack this feature, making them less desirable among surf guitar players.

Surf Bass Guitars

Surf music played a big role in the acceptance of the electric bass and the movement away from the standup basses used by Jazz, blues, and rockabilly musicians of the 1950s. The surf players ushered in the era of the electric bass, launching the modern rock bass sound. Of course, the surf bands used Fender basses, both the Precision bass and the Jazz bass. Another popular brand was the Danelectro Longhorn bass, with its distinctive double-cutaway body.

Just as if their guitars, Mosrite basses were also used by surf bands, such as The Ventures. The Eastwood Sidejack Bass 32 is a pretty good choice, if you want something similar:

The Sidejack Bass 32… great choice for surf music

Surf Guitar Amps

Think clean, sparkly treble and a round, clear bass tone. That’s the essence of surf amp sound. The most famous and venerable surf amps are the classic Fender Showman and Dual Showman. These were early amp “heads” intended to be played through Fender amp cabinets, typically with big 15″ JBL D-130F speakers. These setups have mountains of clean headroom, sufficient to spread the sweet surf guitar sound across an entire auditorium of stomp-crazed beach kids looking for some fun on a Saturday night. You can still find a bargain on Showman heads by shopping eBay, but snapping up the matching cabs with JBL speakers will cost you a month’s salary or more.

Fender Bandmaster

Other popular early Fender amps are the Twin Reverb, Deluxe Reverb, Bandmaster, Vibrolux, and Super Reverb. Any of these true vintage Fenders will likely put you deeply in debt. Fortunately, Fender has revived many of its timeless designs, which are available as the reissue series. The ’65 Twin Reverb, the ’65 Twin Reverb Special 15, Custom Vibrolux, and the Deluxe Reverb Reissue are all excellent choices for surf music. If you want to lay out serious dead-presidents, the VibroKing Custom comes with a built-in ’63 Fender Reverb (see “Reverb” section, below), while the new SuperSonic combines the tones of the classic Vibrolux, ’66 Bassman, and modern high-gain amps.

That said, there are many other affordable – and not so affordable – amplifiers from which to choose. For novices who want to play at home, the Fender Blues Junior gets great tube tone. Other good choices are the Fender Blues Deluxe, a 40-watt with great versatility, and its beefier brother, the Fender Blues Deville (also sold as the ‘Hot Rod’ series amps). A bargain-basement amp that has excellent surf tone is the Fender Frontline 25R, a surprisingly warm-sounding solid state amp. Of course, you can play through a classic Marshall stack or Vox AC30 (the amp used by the fab British instrumental band, The Shadows). Anything is possible – just bear in mind, you’ll be straying from the classic surf sound.

Another choice (and this is mainly for guitar players with lucrative careers as doctors, attorneys, business execs, and mafia captains) are boutique amps. Many makers, most notably Kendrick and Victoria, have re-created hand-wired amplifiers based on the classic Fender circuits. You’ll get classic Fender tone without having to worry about the reliability issues that come with owning a 50-year-old piece of electronic gear. Unfortunately, the boutique makers seem to focus largely on the tweed-era Fenders of the 1950s, rather than the black-face amps of the 1960s, when surf guitar ruled. So, some of the boutique amps seem better suited to mildly distorted blues than to crystal-clear surf.

Surf Guitar Reverb

Ahhh, reverb. One of the earliest effects created for guitar, and the essential ingredient of surf sound. Originally intended to create an ambient atmosphere, like a large music hall, reverb came to the fore in surf music with the creation of the Fender Reverb based on the G15 circuit. Turned up midway, they do capture the sounds of amplified music bouncing off the walls at a high school hop. But turn the dwell, tone and mix knobs up past the mid-mark, and you start to get the wonderful resonance of a guitar played at the bottom of a well, or in a long tunnel, or perhaps through the barrel of a breaking wave. Coveted by surf musicians, these original tube reverb units are the standard by which all reverb is compared – and by which most fail.

Basically a stand-alone box, tube reverb works by taking the original guitar signal, pushing it through a series of springs mounted in a box, then recapturing and amplifying the sound again before sending it along to the amplifier. Soon after the creation of the tube reverb effect, Fender began adding reverb to nearly all of its popular amp models; however, most will agree that the reverb effect built into the amp itself is a pale and sickly cousin when compared to a true Fender reverb.

Today, you can buy reissue models of the classic Fender ’63 Reverb, but bear in mind, these are not actual copies of the originals. While the circuits are similar on paper, the newer units have circuit board construction, rather than the hand-wired circuitry of the originals. You can, however, find hand-wired reverbs by boutique makers such as Victoria, Soldano, and Kendrick, all based more-or-less on the original G15 circuit. You can also buy a kit and build your own (Weber Vintage Speaker Technology of Kokomo, Ind., is a good source for such kits).

If you can’t spend the $250 for a used reissue much less the $600 or more you will pay for a vintage Fender reverb or a boutique clone of the original, you can go with a variety of pedals, starting as low as $35 for a Danelectro mini-pedal to about $150 for a Little Lanilei reverb pedal that actually uses a spring reverb tank. Other popular models include the Electro-Harmonix Holy Grail and Holier Grail, the Verbzilla, and the Digitech Digiverb, which all get excellent reverb sounds for just over $100.

Finally, you may find that the reverb in your amp works plenty good. You may not get the sputtering “boosh” sounds of a true Fender Reverb, but you may find that it’s enough reverb for your throbbing versions of ‘Pipeline’ and ‘Miserlou.’ Then again, you might be like surf guitar aficionado Jeff ‘Big Tiki Dude,’ who believes that there is no such thing as too much ‘verb.

Good surfin’!

Post by: Gavin Ehringer

Let’s Go Surfin’: How to Get the Classic Surf Guitar Sound from MyRareGuitars.com

1967 Fender Coronado XII Wildwood 12-String Electric Guitar

Whether some cat took LSD, or anything lighter, while playing this guitar is also unknown. But there’s NO doubt drugs were involved. That’s because this is a Wildwood. And we’re not talking Jersey Shore here.

Well, ok, we really don’t know for sure about the sex and rock. This is a Fender electric guitar, after all, and I don’t think someone bought it to play jazz standards. Or Kumbaya. So that’s a yes on rock ‘n roll. And, anyone who’s ever played rock, by definition, had to think playing it would lead to at least the chance of a score – I know it’s circular logic, so let’s move on to the drugs.

1967 Fender Coronado XII Wildwood 12-String Electric Guitar

The Wildwood concept was invented by a Danish inventor, who hit on the idea of injecting dyes into growing beech trees. As the trees matured, their wood grain colored in green, gold and purple, gold and brown, dark blue, purple and blue, or blue-green. Someone at Fender, thinking this must be what the kids were looking for, bought the idea of making guitars out of Wildwood. Groovy.

The task of designing Wildwood guitars fell to Roger Rossmeisl. Roger is hardly a household name among general guitar fans, but he’s known to cognoscenti. Rossmeisl was born in Graslitz, Germany, in 1927. He learned guitarmaking from his father, Wenzel, who built Roger archtop guitars during the 1930s and introduced the first electric guitars to Germany in 1947.

1967 Fender Coronado XII Wildwood 12-String Electric Guitar

In 1952 Roger came to the US and landed a job with Gibson. The gig did not work out. Persistant, Rossmeisl went West and hooked up with F.C. Hall and Rickebacker. Accounts are fuzzy about the next facts, but by 1956 Rossmeisl was responsible for designing the Combo 600 and 800 series solidbodies, the legendary 4000 bass, and the Capri lines. He introduced both the top-relief German carve to American guitars (cf Mosrite; Semie Moseley briefly worked for Rossmeisl) and the more specific cresting wave design.

That alone would be enough to secure his fame, but Rossmeisl next approached Leo Fender about designing a line of bolt-neck acoustics in 1962 and was hired. In 1963 Fender’s broomstick acoustics debuted with a support dowel running from heel to tail and, significantly, exotic woods. Not new but cool. And not popular.

Roger is supposed to have known the Danish drug dealer and brought him to Fender. The Wildwood acoustic dreadnoughts and thinline electrics debuted in 1966. Which brings us back to this Coronado XII. The colored graining is in nifty green. The construction is solid, though hollowbodies without a log are not my favorite. And, even though my father hailed from Toledo and I’ve lived there several times, the Glass City’s DeArmond pickups have never been on my must-have list.

Fender Wildwoods officially lasted until 1971, but they were hardly a success, and are now a part of guitar legend. Japan’s Teisco company produced some knock-off Wildwood-style guitars, but they were not any more popular. Roger Rossmeisl returned to Germany and eventual obscurity. Leaving us only, I guess, sex, drugs, and rock ‘n roll – and the Fender Coronado XII Wildwood.

Sex, Drugs and Rock ‘n Roll (1967 Fender Coronado XII Wildwood 12-String Electric Guitar) from MyRareGuitars.com

Custom Longhorn Guitar by Bill Wagoner (Plymouth, IN)

Here is one of my solutions to the problem. I bought a 1968 Coral Longhorn Body off of EBAY for 65 bucks. It had never been used, no neck, not even a neck pocket, no routing for pickups, no wiring, no pickguard, nothing but a body. Enclose is a pic of the body as I got it and the guitar I made out of it. I did all the wiring, inlays, designed and made the pickguards by hand, assembly, set up, everything.

My inspiration for this project was the old BIGSBY guitars made by Paul Bigsby back in the late 40’s and early 50’s and also the gaudy Cool Italian guitars of the 1960’s. Also I was thinking of the original handmade Mosrite stuff where Semie Mosley would include a fancy pickguard, arm rest and so forth.

My first step was to decide on pickguard material. I went with the white pearloid, or what I call Mother of Toilet Seat, in other words, fake pearl. My pickguard material came from ALL PARTS. I sell their stuff in my store and it is great quality. I knew that I wanted to cover the entire headstock with it but that presented a problem. The neck is basicaly a generic strat type neck but since you cannot bend the thick pearloid I had to make it two pieces. I decided to make the second piece double as my truss rod cover. The neck came from a low priced strat style guitar called a Palmer. Great neck for almost no cost and it plays like a dream.

Next was attaching the neck and body. Since this body had never had a neck, there was no neck pocket. After observing what I call the First rule of guitar repair, I routed out an area to attach the neck about an inch of so deep and also removed part of the material under the fingerboard to get the proper slant to the neck in relation to the body. Due to the fact that I was going to use a rosewood archtop bridge I did not need to worry about where I placed the neck since I could position the bridge anywhere I wanted after the guitar was together.

What is “The First rule of guitar repair?” For every minute you DO something to your guitar, you THINK ABOUT IT for 20 minutes FIRST. If you take your time and approach guitar repairs this way you will make a lot less mistakes in the long run! After attaching the neck, I started on my Inlays. All it had when I started was the boring and traditional plastic dots. I drilled those out of the neck and replace them with real abalone dots. Next I used diamond shaped abalone pieces that I bought from RESCUE PEARL Company and cut them into triangles. Then I routed the fingerboard and added them to make the pattern you see now. You can do a search and find Rescue Pearl on the net, nice folks and very helpful and reasonable prices too. I then started to design the pickguard. I wanted it to follow the lines of the F-hole rather than hide the F-hole as they do on so many hollow body guitars. I used old file folders and cut the patterns from them with scissors after drawing them free hand and then copied them in pearloid. The arm rests and the control plate were done the same way. I used an old Seymor Rail pickup I had laying around and kept the electronics simple since there is a limited amount of space on the body anyway. I also made sure to position all the electronics where they can be worked on easily from the F-holes in the future.

Finally I strung her up and added the ALLPARTS Rosewood bridge. Incredibly, the intonation on this guitar is perfect, no need for tune-o-matic bridge saddles at all. It has a wonderful warm woody tone that is different than any of my other guitars and I just love it. Add to that the fun of making it myself and I have a guitar that will never leave my collection.

Post by: Bill Wagoner (Plymouth, IN)

Frankenstein Longhorn Guitar from MyRareGuitars.com