Vintage 1970’s Epiphone ET Series Crestwood Electric Guitar

Here are two examples of the Japanese made EPI Crestwood from the early 1970’s. The Epiphone ET Series guitars were solidbody guitars produced from 1970-1978 at the Matsumoku plant in Japan. In 1970, the decision was made to close down Kalamazoo production of Epiphones in favor of building them overseas in Japan. Epiphone decided to offer a new line of Japanese-built Epiphones that had more in common with other Japanese copies than previous Epiphone products.

Often confused with the Crestwood, Coronet, Olympic and Wilshire, the ET-275, 276, 278, 290 & 290N were a Japanese-made amalgamation of a few older Epiphone body shapes and designs. And unlike the USA originals, these Japanese models featured a bolt-on neck.

Additional Details:

• 1974-1978
• Two humbuckers
• Maple body
• Gold hardware
• Bolt-on Maple neck
• Rosewood fingerboard with pearl block inlays
• Bound neck and headstock
• Tune-o-matic bridge with stopbar tailpiece
• 2 Vol. 2 Tone controls
• 3-way selector switch
• 24.75″ scale
• 1.68″ nut width

Back Catalog Memories: Epiphone ET Series Crestwood Electric Guitar from MyRareGuitars.com

Vintage 1986 Epiphone Firebird 500 Electric Guitar

In a general way, the guitar business has always been about copying. It was just usually a bit more subtle. Kay’s and Harmony’s first solidbody electrics in the ‘50s were loose copies of Gibson’s Les Paul. Many of the guitars made in Japan during the 1960s deliberately emulated European guitars. They were the competition, after all. When Gibson started sourcing guitars from Japan in around 1970, the guitars included some Epiphone copies of classic Epis, such as the Coronet.

The apocryphal story about ‘70s copies related to me by the folks at Aria when I was doing that history was that company president Shiro Arai was visiting the NAMM show in 1968 when Gibson re-introduced its Les Paul Custom “Black Beauty.” Mr. Arai thought, “Hmm, so that’s a copy of the original Les Paul Custom, eh?” He went back to Japan and the first bolt-neck Les Paul copies appeared shortly thereafter. That may or may not be true, but it is a good yarn.

Vintage 1986 Epiphone Firebird 500 Electric Guitar

Most copy guitars from the ‘70s through the early ‘80s were associated with Japanese manufacturers. But by the mid-‘80s the dollar-yen conversion was increasingly unfavorable for Japanese guitars (meaning they cost more than Americans would pop for). Simultaneously, the Korean guitar business had been slowly evolving, with companies such as Samick (Hondo) and Cort producing better and better guitars. The Japanese were markedly superior, but Korean product was coming on strong.

In 1986 Gibson began to shift sourcing of its Epiphone guitars to Korea. Some of these early Korean Epis were nothing to write home about, but others, like this Firebird 500, weren’t too bad.

Vintage 1986 Epiphone Firebird 500 Electric Guitar

To be honest, I didn’t pay too much attention to contemporary electric guitars during the 1980s. I found this about a decade later in a “cheap guitar stall” at one of those antique malls that seem to come and go like raves. (Does anyone throw raves anymore?! To quote the great Oz, “Don’t ask me, I don’t know.”) I’d never seen this model and it obviously had neck-through construction, which I was into at the time. Also, it was silver. I never got the ‘80s taste for greybursts and silver, which I think is ugly, and which, of course, made it all the more attractive to me. I recall buying this on my lunch break and schlepping it about a mile back to the office in summer heat.

This is actually a pretty cool guitar. It’s made of mahogany. The fingerboard is synthetic ebanol, a kind of interesting alternative to disappearing ebony. Of course, you’d rather have wood, but you don’t build budget guitars with premium materials. At least the inlays are real pearl! The Steinberger KB-X vibrato was new at the time, and a pretty good unit. It took ball-end strings without clipping and you could also adjust spring tension with a lever. You could also lock this down to have a stop-tail with the flip of a switch. I’m not sure why you would want to do that, but it’s still a neat idea. The pickups are stock EMG Selects. I never really warmed to Selects. They had a good frequency response and were exceptionally clean, which made them good for pumping through effects, but they lacked essential character, in my opinion. They came in red, black, sunburst, and this silver.

Vintage 1986 Epiphone Firebird 500 Electric Guitar

The Firebird 500 and a downscale 300 were offered from late 1986 into 1988. There are no serial numbers, so this could be from anywhere in that timeframe. No production numbers are available for these models, but scuttlebutt suggests that these are relatively rare guitars. They listed for $825.25, which was pretty pricey for a Korean guitar in the 1980s.

Today, of course, it’s routine for guitar companies to offer all sorts of “copies” of their own lines sourced from any number of factories, usually Asian, sold at various price points. (And sue the pants off anyone else who comes close to copying anything they consider theirs.) There have been numerous subsequent Epiphone Firebirds, but these were the first. And always give me a chuckle when I recall the original brew-ha-ha over the “lawsuit” guitars that started it all.

Hot For Rare Birds (Vintage 1986 Epiphone Firebird 500 Electric Guitar) from MyRareGuitars.com

Mystery Ephiphone Guitar: Prototype or Custom Build?

Mystery Ephiphone Guitar: Prototype or Custom Build?

The guitar was delivered a few days later, and I ripped the box open like a kid on Christmas morning. With packing peanuts flying, I pulled out a hard shell case that could have housed a 335. Inside the case was a label-less, serial number-less semi-hollow electric guitar with Epiphone on the headstock, just like my friend had described. The guitar looked and felt like it was USA-made, but I needed to examine it more closely.

I noted the guitar’s Grover tuners, and the nut looked original and to Gibson spec. The brand was inlayed like a Gibson, with the finial in the center, which is typical of a standard 335. I also noticed what I call “ears” on the headstock, which occur when Gibson cuts the neck blanks for their guitars and then reuses scrap pieces by gluing them to the headstock portion of the blank, creating laminate lines that can be seen on the back of the headstock. The neck and heal were made of mahogany, with no laminate joints, and the fret board was rosewood with dot inlays. However, the headstock had no serial number, no volute, and no stamp to indicate that it was USA-made.

Mystery Ephiphone Guitar: Prototype or Custom Build?

Mystery Ephiphone Guitar: Prototype or Custom Build?

Mystery Ephiphone Guitar: Prototype or Custom Build?

The body of the guitar appeared to be a laminate mahogany top, back, and sides-not maple, like a typical 335- with a subtle, tobacco-burst, nitro lacquer finish. The bridge was a Gibson-stamped ABR Tune-o-matic, and the wiring was braided like a Gibson as well, but I could find no label or markings inside the f-hole.

Since I was having a hard time dating the guitar without a serial number, I decided to remove the electronics to get a look at the pots, switch, and pickups. Tone and volume potentiometers typically have a series of numbers on them that identify the manufacturer and the production date. Unfortunately, these pots were liberally covered in solder, which made the numbers completely indiscernible. The pickups, however, did offer me a clue.

Mystery Ephiphone Guitar: Prototype or Custom Build?

In 1980, the Norlin Corporation began to take the first steps toward production of a reissue Les Paul guitar, and they assigned engineer Tim Shaw the task of reproducing a PAF-style humbucker for the project. Due to financial constraints set by Norlin, Shaw could only approximate certain aspects of the original pickups, but the final product was a PAF-style pickup that was superior to the pickups that Gibson was producing at the time. Tim Shaw pickups are easily identifiable because they have a separate, ink-stamped series of numbers on the bottom that indicates the type of pickup (bridge or neck), as well as the date of production. The pickups in question were stamped 329 682, which revealed that the production year was 1982.

I was looking at an Epiphone-branded, Gibson-made, USA-manufactured 335 with no serial number and no label, but with pickups that gave me the guitar’s production year. My conclusion was that the guitar must have been either a prototype, or maybe a personal build for someone who worked for Gibson at the time. Either way, my friend had himself a great playing and sounding instrument, and I’d had fun doing the detective work.

Mystery Ephiphone Guitar: Prototype or Custom Build?

Written by: Dave Anderson

Checking Out a Mystery Epiphone Guitar from MyRareGuitars.com

1988 Epiphone Spotlight Electric Guitar

Like on the telephone commercials with the wizard, the goofball crew and the “puppy,” I can hear you gasp, “What the…” Epiphone Spotlight? Never heard of that puppy. Nevertheless, this is a real beast.

I too had my doubts when I first laid eyes on this sweetheart hanging in a pawnshop down on South Street in Philly. Like almost everything I bought back in those days (mid-‘90s), nobody knew what the heck it was. The fit and finish (high gloss polyurethane) were too good, and besides it was a neck-through. That means some serious commitment. I snatched it right up for a couple bills, of course. The quilted top alone was worth that! This was a beaut!

1988 Epiphone Spotlight Electric Guitar

But what was it? That’s when I started pawing through the Epiphone paper I’d managed to acquire. There it was, in a promotional pack from Gibson that my friend Michael Lee Allen had thrown in with one of my catalog orders. The Epi…no wait…the Gibson Nouveau series. Curiouser and curiouser!

Epiphone, of course, had been Gibson’s budget brand ever since they bought their fierce rival in 1957. Epiphone had become an imported line in 1971, thus beginning a long and complicated peregrination as an offshore product.

1988 Epiphone Spotlight Electric Guitar

But Gibson would periodically revive the American manufacture of Epiphone guitars, including some of the last guitars made in Kalamazoo before the final move to Nashville. Which is a fascinating tale, but doesn’t explain the Spotlight mystery.

Turns out that sometime after Norlin’s sale of Gibson to its current owners, someone hatched the plot to produce the Nouveau series. In the late ‘80s Japan was still regarded as a prime source of budget guitars (this was about to end). The Gibson Nouveaus were going to consist of parts made in Japan—neck and body—and assembled and finished in Nashville. This would, of course, technically keep them “American made.” This was not uncommon back then; Kramer seems to have specialized in the practice. The project got as far as introductory literature, as my paper stash demonstrates. As this guitar testifies, the rest of the plan was executed as well, but with another of those twists. Somewhere between the manufacture and finishing, these became the Epiphone Spotlight series. Maybe they got cold feet about the sleight of hand.

1988 Epiphone Spotlight Electric Guitar

In any case, the result was ironically a new—and no doubt rare—“American-made” Epiphone! And a fine one it is. The shape of this guitar is suspiciously like that of the brash young guitarmaker from Maryland named Paul Reed Smith, which were just beginning to make some waves at the time. The Spotlights have neck-through-body construction, with mahogany necks and bodies, capped with a gorgeous carved quilted maple top. As befitting the “budget-deluxe” concept, what looks like a two-octave ebony fingerboard is ebonol, like that used on early Kramers. Reflecting the Epiphone-by-Gibson branding used at the time, a pearl diamond engraved with “Gibson” graced the headstock. Pickups were EMG Selects, serviceable if not exceptional, hooked up one volume and one tone, the latter with a push-pull coil tap pot. This version was outfitted with a traditional style vibrato, but I have another one equipped with a locking Steinberger HB vibrato. There were most likely stoptails, as well, but who knows?

This is a really nice guitar. The heavy poly finish is a bit much, but there’s nothing not to like here.

As evidenced by how familiar we all are with the Epiphone Spotlights, they obviously didn’t last long. However many were made seem to be from 1988. A good guess is that probably one shipment of necks and bodies were produced. 50? 100? The two I have are among the three I’ve seen, all in Philadelphia. I don’t know if any of the Gibson Nouveaus were ever made, although the introductory literature shows photos of them, so at least a couple prototypes were probably put together before the switch to Epi. As common as Epiphones may be these days, the Epi Spotlights both uncommon and uncommonly good!

Center Stage in the Spotlight (1988 Epiphone Spotlight Electric Guitar) from MyRareGuitars.com

The bottom line is, that Leo made a less than great bass amp that is a great guitar amplifier. Great mistake #1.

Leo Fender does it again!
I list some more of Mr. F’s miscalculations here.

The Stratocaster, arguably the most important guitar in rock and roll history, was originally thought of by Leo as the perfect guitar for his favorite guitar player in his favorite band. The guitar player was Eldon Shamblin and the band was Bob Wills and the Texas Playboys. Those of you not familiar with the aforementioned band and guitar player they were a western swing phenomenon of the 30’s and 40’s with a very big following in California. Leo wanted to create a guitar that would fit into the sound of the band whose music at the time was fertile ground for arch top jazz boxes. So Leo’s Stratocaster was supposed to be a jazz and swing guitar. I ask again when was the last time you saw a jazz or swing guitar player strumming four to the bar on a Strat?

One more from Leo:
Ah yes the Jazzmaster, I guess when the Strat didn’t make the grade with jazz guitar players Leo figured if I put the word jazz in the name that might make jazz guys wanna play them. Again Leo failed at creating a jazz guitar. History tells us that the Jazzmaster as was the Jaguar were copied incessantly by overseas guitar makers. They being so impressed with the upper end, Fender decided to copy them instead of the more popular Stratocaster, another mistake that has went under the radar.

Gibson gets into the mistake game too.
When Fender came out with the Telecaster and it became popular, Gibson said we must get into the solid body guitar world. We all know that Les Paul was consulted and in 1952 Gibson’s first Les Paul showed up. Legend has it that Gibson, a builder of top end arch tops and flat tops could not see themselves putting the Gibson name of a no frills slab of wood with a screwed on neck. So they insisted that their loyal Gibson customers would want the solid body guitar to have an arched top like their “box” guitars.

So they made a two pickup solid body with an arched top and a fancy gold top.

The guitar was not well received by players, as a matter of fact the Gibson players they were after, and thought the guitar was a non responsive, heavy guitar, especially with the 1952 trapeze tailpiece that made it impossible to mute with your right hand. The players who were the new solid body rebels saw the Les Paul as an overpriced, ornamental, non cool guitar.

One aspect of the Les Paul design that has been debated over the years was did the arch top on a solid body guitar actually make a difference in the sound and was the difference a better sound? That question I will leave to you to answer yourself, my opinion is that all design features affect the sound somewhat.

Interesting subtext to the Les Paul legacy is that when Gibson introduced the SG style guitar, players started cramming to get old design Les Paul’s. Gibson seeing this, eventually reintroduced the Les Paul in 1968 after a seven year hiatus.

Another cool mistake was that when Gibson came out with the circa 68 Paul’s they had leftover stock of Les Paul bodies from the 50’s that were already routed for the P90 pickup. The dilemma was that the new humbuckers did not fit the hole in the body. Gibson thought, what do we have in stock that would fit into this P90 hole? Well after acquiring Epiphone (1963ish) they had a stockpile of Epi’s venerable New York mini hum buckers. They made a plastic ring around the pickup to retrofit it into the P90 rout, and figured we might as well call it something different hence the Les Paul Deluxe!! (Didn’t you ever wonder why the Deluxes were initially all gold tops?)

So I think that great ideas sometimes are not necessarily what they were intended to be, but are still great ideas!

Here are some of my own off the wall ideas…

1. Baritone guitars set up for slide: I did this by chance at a gig when I mistakenly brought along my baritone instead of my slide guitar. I took some 11 gauge strings strung up the old baritone and played the gig. The guitar sounded unbelievable! Sustain and tone was awesome. The sound was more like lap steel than a regular guitar strung for slide. BTW the guitar I used was a cheapo Kingston Baritone, later on I used a better guitar and that one sounded great too.
2. Flatwounds on a solid body guitar: I love flat wounds on hollow body guitars, but I have really come to enjoy them on Tele’s and Mosrites (and all their clones). You get that old school Glen Campbell/Joe Maphis sound, great for surf stuff too. Another benefit from this set up is using a fuzz box with the flat wounds on a solid body. You can replicate that hard to capture 60’s studio sound exactly, remembering that many of the studio guitar players in the 60’s were still comfortable with their flat wounds and that many of them were using the same guitar for every session. Check it out! Oh and BTW single coil Fenders, Mosrites work best for this application I find Gibson solid bodies are too muddy with flat wounds.
3. After seeing Johnny Winter playing a Fender XII 12 string strung up for slide, and seeing Blues great Earl Hooker playing a Gibson double neck with the 12 string neck with 6 strings on it I figured “maybe there’s something to this”, and guess what there is! The added mass to the headstock adds an X factor to the sound in the form of added sustain and a magical high mid cut that really sounds very unique. Suggested guitars to try this on a Fender XII, Epiphone Riviera 12 string (great combo w/ the mini humbuckers), and any decent Japanese cheapo guitar if you string it for slide you will not be sorry.

That’s it for now! Keep on strumming and remember Joey Says Experiment!!!

Joey Leone with his Fender Telecaster

Peace and Joy.

Great Mistakes in the World of Guitar from MyRareGuitars.com