1960's Lafayette LA-75 Vintage Guitar Amplifier

What’s to love? First of all, its Jetson-era Mid Century Modern styling that makes it pretty as a piece of vintage furniture. It’s a classy looking little box—the only American made amp it resembles is the nearly-equally cool looking Dano-made Silvertone 1432 (itself a bit of a sleeper, as it was a predecessor to the classic and easier to find 1472 and 1482 series). But while the 1432 relies on the classic duel 6V6 setup for its bluesy grind, the Lafayette runs two 7189s for output.

What’s the difference? Not much, actually in the tone of the amp. The design of an amp has at least as much to do with its tonal makeup as does its output tubes, and this little Japanese combo sounds much like Danelectro’s and the Chicago beasts of its era (Valco, Lectrolab and so on). It’s got the familiar thick, dark, lush tone at under 4 on the volume knob, and it has an impressive and small gig volume when it starts to get into its grind around 5 and up on the volume knob. And it has two channels, which you can jump to enrich both the chewy grind and the thickness of the amp.

1960's Lafayette LA-75 Vintage Guitar Amplifier

Mine seems to have the original ALNICO speaker (Japanese amps don’t always share our speaker codes, so it’s hard to say what make it is) that sounds very much like a Jensen ALNICO I have in a 1958 Ampeg Mercury (I switched them and the tones are nearly identical).

What makes this amp unique among some of the great Japanese made amps of the same era? Its tone is actually very Valco. Dark, chewy, biting and fat, fat, fat. While some of the Guyatone’s and Univox’s have a tone all their own (which, no doubt, is very cool), the Lafayette 75 really has that great thick grind that the Chicago (and New Jersey, in Dano’s case) amps had that is perfect for jump blues and, when pushed, unhinged overdrive into Neil Young territory.

1960's Lafayette LA-75 Vintage Guitar Amplifier

And now that Valco’s have become increasingly expensive (though still worth it in many cases), it’s put the amp lover on a budget hunting for other great amps that are still super affordable. Brands like Premier (in some cases), Hilgen, Univox, Guyatone, Alamo, Lectrolab and some Danelectro’s can still be found in nice shape in the $300 range. For hand-made point-to-point (or hand stuffed circuit boards) amps with good iron and great tone, you’d have to pay a lot more for a new boutique amp. And these can be had needing only minor work (in many cases). What’s not to love?

But back to this model 75. The lush depth of the 7189s is apparent throughout the volume range of the amp. The tremolo is rich and VERY 60’s sounding. It has more of a rounded, gentle wave than a sharp cut-off helicopter tremolo, with no noticeable (or apparent) volume drop when the effect is engaged.

Also, one of the cool things about the 7189s is that they are not like the 7189A’s that are in some great amps, such as the killer Magnatone M10 (and most of the Magnatone Suitcase series). Whereas the very expensive (and increasingly rare) 7189A can’t be substituted with 7189s OR with EL84s (without modification), the 7189 CAN use a rugged EL84 with no modification.

1960's Lafayette LA-75 Vintage Guitar Amplifier

So, an amp with rich clean tones and a super overdrive sound that looks rad and weighs well under 30 pounds. Keep your eye out for this amp (and other Lafayette models—some of which were made by the same factory that made Univox amps—some don’t seem to be. It’s a crapshoot with 60’s Japanese amps).

Are there any problems with this amp? The handle rattles. Annoying, but hardly the end of the world…just use a little form when you’re recording. Not so bad.

It also digs pedals. I’ve added a germanium boost to this and it positively blooms on the notes. Add some reverb and the lower volume cleans are lush and astounding. In an amp/tone world where so many players are looking for the tone and range of the classic Tweed Deluxe, there are so many great tonal options in the 15 to 20 watt range. Enjoy and explore.

1960’s Lafayette LA-75 Vintage Guitar Amplifier from MyRareGuitars.com

Kalamazoo Reverb 12 Combo Guitar Amplifier

There are some great amps to be found in the Kalamazoo line (Gibson’s cheaper amp line in the mid to late 60’s). Among these are the Kalamazoo 1 and 2, which are single-ended EL 84 amps, the latter with a nice tremolo. These are killer little practice and recording amps with a nice clean and a good over-driven tone. If you’re looking for a good alternative to a Champ, here’s a frugal way you might want to go.

For giggable power, check out two of the real sleepers of the Kalamazoo line: the Bass 30 and Bass 50 models. These are pretty lousy bass amps, but pretty wonderful and affordable guitar amps (how many sub-par bass amps, from the Fender Bassman, to the Ampeg Bassman, to these Kalamazoo models have been used for an unintended purpose as guitar amps to stellar results?). The Bass 30, with its funky, very simple flip-out control panel, runs on 7591s and has two sweet sounding 10” Jensens in a closed back setup. Loud, with lots of nice crunch and not too heavy to lift. If you can find one, you’ll be surprised at what great tone you can get out of it—especially with single coil guitars.

The Bass 50 shares the cool flip-out panel and the closed back cabinet, but generates its output from two EL34s through two Jensen 12” speakers. Tons of grind—and great overdriven tones with single coils AND humbuckers. This is even more rare and hard to find than the Bass 30, but it’s definitely worth hunting down for some awesome overdrive tones on the cheap.

And in between the little practice amps and the converted bass amps? Well, there sits the tops of the Kalamazoo line (such as it is): the Reverb 12. This is often cited as Kalamazoo’s answer to the Fender Princeton and, it’s true, it shares several of that amp’s makeup on the surface: Both are low wattage (about 12 watts) push-pull amps with 10 inch speakers and tremolo and reverb. But, beyond the surface, the similarities end. The Kalamazoo is not as loud as the Princeton, for one, and you’d need a pretty quiet drummer if you were going to use it along (without an extension cab) on a gig (not impossible, but the drummer would have to play pretty light or with brushes). Also, the Kalamazoo doesn’t really start to get into overdrive until pretty late in its game (between 8 and 10 on its “Loudness” control)—whereas the Princeton starts singing a little earlier in its volume range.

What do you get in the trade-off? Some great tone in that wonderful zone between total clean and full-out distortion (think that early great Jimmy Bryant tone—slightly clean, but with a nice textured amount of grit and hair in the mix).

Also, the reverb and the tremolo are VERY nice for such a small amp. It’s a very versatile, great sounding little combo that’s great for bedroom playing, small band practices and, of course, recording.

Kalamazoo Reverb 12 Combo Guitar Amplifier

What’s under the hood? It’s a pretty simple, easy to work on design. Three 12AX7s (running the reverb driver, the tremolo oscillator, and the preamp and phase inverter duties), solid state rectification and two EL84’s for the output into a 10” speaker. I replaced the tired original CTS speaker in mine with a very efficient Celestion, and this really brought the amp to life—bringing out a LOT more volume and clarity and tonal dynamics. It’s a great little amp.

It’s also surprisingly versatile, as a result of the extension speaker output on the back. Run this little “practice” amp into a 4X10” cab, and wow, you suddenly have plenty of power for a gig! The amp also has an odd (for the era) RCA mono phono input (if you want to play along with a CD or one of those old-fangled records you hear us old timers talk about from time to time).

The control panel is simple, but kind of fun and funky, as it has, from left to right Loudness (instead of “Volume”), Treble (which also serves as the on/off switch, Bass, Frequency (for trem), Depth (also for trem), and Reverb. It has two inputs, but only one channel, and the inputs are the same level (that is neither is hotter than the other). The cab is ½ plywood and the construction is true point-to-point (not the hand-stuffed circuit board that often, erroneously, gets called point to point). It’s an easy to follow point to point—easy to work on, which you’ll probably have to do to at least replace the filter caps on these (which were a good deal cheater than the ones used by Fender, and they tend to go bad).

So, you get great cleans…a sweet singling overdrive when pushed to its limit and you can actually gig with it if you run an extension cab. AND they frequently (at least for now) sell for between $200 and $300. What’s not to love? Get yours now, while you can. A very cool amp, with its own sound—and a very usable sound at that.

1960’s Kalamazoo Reverb 12 Combo Guitar Amplifier from MyRareGuitars.com