This month I will be discussing a much overlooked aspect of guitar playing and appreciation, the professional setup. As I always say – this is not MY Guitar until it is setup to my specifications. I think perhaps 90% of today’s guitar players do NOT have a personal guitar repair technician that they work with. People have a favorite video / music store with a favorite clerk that helps them with selections, a tailor, a banker, a doctor, a dentist, a lawyer… yet they don’t have a favorite guitar tech. Why? Here are three scenarios that will exemplify this point.

Scenario #1: My Seagull sounds better then my Martin!

How many times have I heard this story, “I bought this cheap guitar at a local music store for $200 bucks, and it really needed a good setup and strings, and afterwards it sounded amazing!” The truth is that this is no urban legend – the professional setup is the real deal – and can make a decent guitar play and sound very good and sometimes even great. This is true for electrics and acoustics equally, although the most obvious is the acoustic as they are usually more prone to neck and body adjustments due to heat and humidity (or lack thereof). But, the electric guitar also needs a good setup as well.

Scenario #2: Music store guitars.

In my 30+ years of perusing music stores I have rarely entered a music store where the guitars were maintained w/ fresh strings and a good setup. As a matter of fact they are rarely even in tune to concert pitch (A440). I know – the profit margin, the man hours, blah, blah, blah – the truth is Mr. Music Store owner you will sell more guitars if they are maintained. Truth be told unless you are talking about a high end guitar shop where they have to sell guitars to pay the rent, guitars are usually hung up on the wall and expected to sell themselves.

So if you are really interested in buying a guitar in a music store, ask them to restring it and set it up for you. I mean don’t be an idiot and jerk the guy around for no reason, but you should know what it sounds like before you buy it. For a guitar under $1,000? Probably not. But for something more expensive, you bet.

For all you vintage guys out there how many times have you picked up that prehistoric Strat and were disappointed with how it played, knowing full well that it probably has been sitting for a long time without the benefit of some needed tweaking. Most dealers will say, “dude I left it as I found it” like that is a favor to you, how convenient! It’s really a disservice to those who’ll plunk down 20 G’s for a piece of guitar history, because these fellas know as well as we know, that just because it was made 50 years ago don’t mean it’s a good guitar, and the only way to know is? You guessed it, if it’s setup professionally.

Scenario #3: Online Purchases.

Online mega stores, Ebay auctions, direct sales, mom and pop sellers, third party sellers, yes my friends this is where a majority of guitar and guitar related commerce is done, online.

I must confess that I was one of those “I ain’t buying what I can’t play” guys. The idea of paying for a guitar that I had not seen gave me chills, and even more frightening to this paranoid guitar buyer was the fact that I was buying one of many guitars in that model that they had in stock. Who was going to pick the one I was getting? Beavis or Butthead? Or what does “very good condition” mean? Now we deal with words like “vibe” “correct” and “players” guitar – and are supposed to know what that means. I know what new means, it means new! I know what a demo is, it’s a demo! Alas, now I have learned how to buy guitars that I cannot play, one way is to buy from someone who is reputable and has a track record. Another is to buy what you know, a 1970 ES 335 (if it has no issues) is a 1970 ES 335, you will pay for it, and 99 times out of 100 get what you expect (from a reputable dealer or seller).

BUT… Now please my friends, pay attention here because this is the gospel as I know it. Never take a guitar out of a box after it has been shipped to you, and expect it to play right. To me that’s an unreasonable expectation. You buy a guitar on the merit of its sound, playability and pedigree (where and who it comes from). Like I said earlier, you can’t expect the store owner to take a lower cost guitar, re-string it and setup to your specifications, just for you to try it out. All players have different ideas about string gauges and low action etc, etc. That is why you need to find your own local technician, who will begin to understand your personal preferences and expectations. These guys can make a $500 guitar play like a $5000 guitar, and the more they know about you the better a job they can do for you. So, as soon as you get your guitar, inspect it for shipping damage and for flaws. As far as flaws are concerned, be reasonable, as far as I am concerned my expectations on a guitars fit and finish are directly related to its price.

Here is what I believe are the necessary parts of a good setup:

• A neck adjustment (if needed)
• Intonation
• Action adjustment
• Fret work (leveling if needed)
• Pickup balancing
• Nut filing (a way underrated aspect of tuning issues)
• New strings
• Cleaning scratchy pots (used guitars)

These tasks should be done by a qualified guitar repairman. You should have a local guy who knows your likes and dislikes. I personally like a flat neck adjustment with almost no bow and a higher action then most would like. You have your own expectations for a setup, communicate these to your local repairman and than enjoy your guitar.

Guitar Tech Setting Up a Guitar

I will say again – any guitar I own is not truly mine until it is setup to my specifications.

So in closing my friends I respectfully say don’t decide whether a guitar is a good guitar or not until it is setup professionally.

So many guitars, so little time.

That Is Not My Guitar Until It Is Setup To My Specifications from MyRareGuitars.com

Tuning a Gibson Acoustic Guitar

Everybody deserves to have a guitar that plays well, stays in tune, and is in tune with itself. This is not just the privilege of globetrotting superstars, but everyone who owns a decent instrument.

Before I go any further, let me give you the proviso that I am not a guitar tech, set-up guy, or luthier. I’ve been playing for almost 4 decades and I’ve picked up a lot of valuable information along the way. What I do know is when to go to an experienced guitar technician / luthier to get problems solved. The whole purpose of this column is to inform those of you who were curious about some of these things but were afraid to ask or just plain didn’t know. You experienced guys and gals – Eddie Van Halen and Django Reinhardt: who’s better? Discuss.

New Eastwood Wandre Deluxe Electric Guitar

New Guitars

In preparation for our upcoming cross-Canada tour this summer as a member of The Bachman Cummings Band, I decided to take my 2005 G&L ASAT Deluxe to my friend Brian Mascarin, a very in-demand luthier and guitar technician in Toronto, to have him dress the frets for me. Now you would think that the frets on a $2,500 guitar like a G&L would be set-up to perfection. Not so.

Consider the journey that guitar took to get to me: it was made in California in a very temperate climate, traveled across the continent in a truck, possibly in freezing weather, and arrived in Toronto where it hung in a music store for the better part of two years by its neck! And with the same set of strings!

I detected an annoying buzz under the D string that I couldn’t get rid of so I took it to Brian. He said it is not uncommon for some guitarists to come directly from the music store with a brand new Gibson, Fender, or Paul Reed Smith to his shop where he sets up the instrument to its new owners specs and tweaks any minor flaws that the factory may have overlooked. Keep in mind that with the worldwide explosion in popularity of the guitar, these manufacturers have to pump out literally hundreds (thousands?) of guitars every month. It is not realistic to assume that these instruments are 100% ready to go in every way for every player’s needs.

The need for a set-up by a qualified expert is even more crucial in the case of instruments made offshore: drastically different manufacturing climates, month-long trans-oceanic journeys with varying degrees of temperature and humidity, and high volume factory output are factors that have to be considered. No one can dispute the very high levels of quality and workmanship that goes into guitars made in Asia but keep in mind the changes and the journey your instrument has undergone before it got to you. No wonder it needs a bit of tweaking and TLC!

Guitar Strings on the Wall

Strings

Quite often I hear of guitar owners complain that their newly purchased axe just doesn’t play the same as it did when it was purchased (Hey! It was in tune when I bought it!).

Did you change the strings? Of course you did. You took off the now tarnished and oxidized strings that the factory installed and put on a fresh set of your favourite brand with your favourite gauge – you know the super slinky .008’s with the .056 E string! Or the good guys at the store or e-store threw in a set of strings for you. Now the neck has a bow in it and the strings are an inch off the neck.

Why? Because you changed the geometry of the instrument. Here’s a real nugget for you – a guitar’s playability is affected by the gauge of string you use! A set of strings exerts hundreds of pounds of tension on a guitar’s neck. When you change the gauge or thickness of those strings, the tension on the neck changes. Your guitar was set up with a certain gauge of string at the factory. Unless you replace the strings with exactly the same brand (string characteristics in the same gauge vary from brand to brand owing to different manufacturing techniques and different metals used), your guitar will play differently. The only way to accurately determine the gauge of a string is with a micrometer and not many music stores have one of those under the counter.

What to do? Pick a brand and a gauge of string, get your guitar set-up for that string and stick with that string. When you experiment with different brands or gauges (and you should!), get the guitar setup again for that particular string.

Guitar Neck Truss Rod Diagram

Truss Rods

The truss rod is what is adjusted to add or reduce – relief – or bow in the neck. As I said in the opening, I am not a repair guy and I’m not going to tell you how to adjust your truss rod. I personally don’t think you should because the potential for permanent damage is huge. This is when you should go to an experienced technician.

Tune-o-Matic Guitar Bridge

Intonation

Ever wonder why some chords play in tune and others don’t? That’s intonation – the guitar’s ability to be “in tune” with itself. Without going into a long boring treatise on the tempered tuning system developed in the 16th century or whenever it was, suffice to say that your electric guitar, thanks to Mr.McCarty and the engineers at Gibson in the 50’s, has a bridge with little moveable saddles on it called a “tune-o-matic” bridge.

These little saddles adjust the string “length” relative to the 12th fret, which theoretically is the midpoint of the note. There are many resources on the net to get more details on the theory, but the idea here is to let you know that if you have a decent electronic tuner, a small screwdriver and a bit of patience, you can intonate your guitar so that it plays more in tune with itself.

Here’s how you do it:

1. Plug your guitar into your tuner.
2. Tune the strings to pitch.
3. Pluck the harmonic of the 6th string (pluck the string with your finger directly over the 12th fret without fretting the note).
4. Fret the note at the 12th fret and compare it to the plucked harmonic.
5. If the fretted note is sharp, move the saddle back (or to your right looking down on the guitar). If it is flat, do the opposite. Make small adjustments until the pitch of the harmonic and the fretted note is the same. Do this for all 6 strings.
6. If you’re confused, go see your friendly neighbourhood guitar technician or luthier. A set-up with new strings, truss rod adjustment and intonation costs around $20 – $50 but it is well worth it.

Resources

Please visit David’s Website and don’t miss the Bachman Cummings tour this summer!

Here are the names of three very qualified technicians / luthiers in the Greater Toronto Area:

• Musicality, Brian Mascarin (416) 787-1531 Toronto
• The Peghead, Mike Spicer (905) 972-9400 Hamilton
• The Guitar Shop, John Bride (905) 274-5555 Mississauga

Guitar Tuning & Set-Up Tips of the Stars! from MyRareGuitars.com