Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

Inevitably there’s always an earlier “earliest,” but the earliest amp-in-case I know of was built by Daniel when he was working for Epiphone in around 1936. Nathan I. Daniel was a young electronics wizard who was discovered in the early 1930s by Epiphone’s head engineer Herb Sunshine building amplifiers in the basement of a New York department store (back when department stores really had departments and they did things). In 1935 the Epiphone Banjo Company changed its name to Epiphone and introduced a line of electric guitars and amplifiers called Electraphones, which was almost immediately changed to Electar. These included electric Spanish archtop guitars, Hawaiian lap steels, and little amplifiers designed and built by Nat Daniel. In 1936 Epiphone offered its Electar Model C Hawaiian guitar with an amp built into the case, designed by our friend Nat. For some reason, it didn’t go over very well, and the amp was quickly separated out into the Model C amplifier.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

In 1938 National-Dobro revisited the idea, introducing the Supro 60 Electric Combination and the Portable Supro 70 Electric Combination. Both of these featured a little pearloid-covered Supro Electric Hawaiian Guitar tucked into an amp in case unit. I don’t think any of these earl amp-in-case designs did particularly well, but then there was something called the Great Depression going on, which had to have an effect on sales.

Obviously, Daniel thought the idea was good enough. Daniel worked for Epiphone until 1942. After the War Daniel opened his own plant, Danelectro, in Red Bank, NJ, mainly making guitars and amps for Sears and Montgomery Ward, badged Silvertone and Airline, respectively. They began selling Danelectro-branded guitars and amps in around 1954. People throw the term around all too often—and ignorantly—these days, but those ‘50s and ‘60s Danos were truly iconic.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

And maybe the most iconic of Danelectros were the Silvertone Amp-in-Cases made for Sears beginning in 1962. The first were the smaller black-sparkle-finished Masonite one-pickup No. 1448s with an 18-fret fingerboard and a small 3-watt, 6” speaker tube amp built into the case. These were followed in 1963 by the full-size red-sparkle-finished Masonite two-pickup guitars with a 5-watt, 8” speaker tube amp, the No. 1449.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

Let me get this off my chest. Something’s “iconic” when it represents something bigger than itself. “Iconic” does not mean, as modern advertising copywriters throw it around everywhere these days, “his best album,” or, more often, “very famous” or “extremely popular.” Icons are like symbols or metaphors with greater meaning attached, signaling a bigger message or concept. These amp-in-case guitars are icons because they stand for a whole generation and the changes in American culture that were transpiring in the early ‘60s. They were targeted at maturing Baby Boomers who were doing Beach Blanket Bingo with Annette from the Mickey Mouse Club (or, more likely, imagining that they were), switching from Folk to surf rock, starting bands in their suddenly suburban garages. A population on the go, on brand new Interstate superhighways. See the U.S.A. in your Chevrolet. Well, you get the point. I’ll be quiet.

As with everyone else in the ‘60s, Danelectro got bought out in 1966, here by entertainment giant MCA. Whether due to the ownership change or coincidence, the Dano line was shuffled. The two-pickup 1449 was renumbered to 1457 and a bunch of new models debuted. While the amp-in-case concept seemed to continue to 1969, it was no long the iconic versions we know and love.

Vintage 1964 Silvertone 1457 Electric Guitar with Amp-in-Case

I’ve never played a 1448, but I’ve played this 1457 and the amp is surprisingly good. The 8” speaker and tube output have really sweet tone and really decent volume, more than you’d expect. I can’t say the guitar knocks my socks off, but as primitive as it is, it plays fine and it’s pretty good for a few choruses of “Walk, Don’t Run” and “Apache.” These are pure guitar fun! And, yes, they are iconic…

Garage-Band Dream Machine (Vintage 1964 Silvertone 1457 Guitar with Amp-in-Case) from MyRareGuitars.com

This design is based around the early 60’s Silvertone Jupiter H49 which was also available with the Airline brand. Here we have upgraded our existing Airline Jupiter to create the Jupiter PRO. We’ve added a unique blend control that lets the player dial in a wide variety of tones. We have also replaced the wooden bridge with a Tone Pros Tun-o-matic, upgraded the bolt-on neck with a set maple neck and upgraded the hardware to create a solid, tour worthy guitar for today’s modern player.

This model features dual Airline Argyle pickups, three way flipper switch, two volume, two tone controls and a unique “blend” control that pans between the two pickups when the flipper is in the center position. The blend control ranges from hi-tone bridge pickup to neck pickup with the tone rolled off. Very versatile! Black finish with gold metal flake. Also check out the Jupiter PRO – Dallas Green Signature Model.

All PRE-ORDERS will receive a Body Glove Hybrid gigbag (factory list price $199) at no extra cost.

only $879. $49 Shipping to North America, $149 to UK and Europe. $189 Australia, Japan, etc. $285 South America.

**SOLD OUT**

All PRE-ORDERS will receive a Body Glove Hybrid gigbag (factory list price $199) at no extra cost.

NEW Airline Jupiter PRO – Metallic Black Finish – June 2013 from MyRareGuitars.com

The Poorboys ’65 (Vintage Silvertone 4 pickup electric guitar)

Approximately 4 yrs ago I had a brainstorm. I thought I would try to find a guitar that was similar to the one I had in Junior High (1963). That would be a four pickup Silvertone solid body guitar. When I was 12 and the Beatles came out, I had decided that I wanted to play guitar. My sister bought me a Stella to learn on, and I saved up enough to buy my own Silvertone guitar and the Twin 12 amp.

Shortly after I bought the guitar I was approached by some guys in my class, and they asked me if I would lead sing for them. Of course I jumped at it. When they heard I played guitar that was a plus.

Our band, the Poorboys, stayed together for about 4 yrs. We then split up. I lost interest in the guitar and sold it to my cousin in 1969. From this point on I never heard anything about the guitar.

Fast forward to 2009. I decided to try to find a guitar that matched to one I had. If the paint didn’t match, that would be okay, as I would refinish it to hang on the wall. I went on eBay and searched for a Silvertone 4 pickup solid body guitar. That particular day there was only one. It was a sunburst paint job. Everything worked. I contacted the guy and asked him about the guitar. He was being quite the butthead, as he acted like I was putting him out. Anyway, he had a ‘Buy It Now’ price of $550. I asked him if he was high or something, as I thought his price was totally out of place . He hung up on me.

Well I bidded on the guitar and won it for $325.00.

Shortly after I bought it, I checked it out and everything worked. It was just ugly with the sunburst paint. I stripped it down and tried to make the paint work but was struggling. I put it up on the shelf.

In September of 2012 I decided to just paint it and hang it up as it was just a memory and that’s it. As I was putting it together I noticed the chrome was perfect on the whammy bar cover. When I looked underneath I found the initials (gB) The day after i bought the guitar in 1963 I took the cover off and scratched my initials on it. When I saw this I just about died. I started thinking about the rest of the guitar. I remember putting a small chip in the volume control knob when I was taking it off. I also remember that one screw that held the tuning knobs on was different as one was stripped. I checked and both were there.

This guitar is the one that I bought in 1963 and played for several years and was a very important part of my rock and roll life. This guitar is home to stay.

Written by: Gary Berdinski

This Silvertone is Home to Stay from MyRareGuitars.com

Vintage 1960’s Silvertone Mosrite Electric Guitar

Here’s the original description from the 1969 Sears catalog:

Solid Body Electric Guitars Triple pickup (7 combinations). Three pickup selector switches. Solo selector switch for quick tone changes. Vibrato tailpiece produces Hawaiian and other special effects. Roller-type bridge adjusts. Ebony fingerboard. Edge-bound body. Highly-polished flame sunburst yellow, shaded to red, shaded to mahogany color. With vinyl-covered lined chipboard case. 1445L–Shpg. wt. 14lbs. $5 monthly. Cash $78.95 2 x 13 7/8 x 41 1/4 in.

1960’s Silvertone Mosrite Guitar (Back Catalog Memories) from MyRareGuitars.com

TEISCO guitars sold in the United States were badged “Teisco Del Rey” beginning in 1964. Teisco guitars were also imported in the U.S. under several brand names including Silvertone, Kent, Beltone, Duke, Heit Deluxe, Jedson, Kimberly, Kingston, Lyle, Norma, Tulio and World Teisco. Likewise, they were imported in the UK under such labels as Arbiter, Audition, Kay and Top Twenty. While guitars manufactured by Teisco were ubiquitous in their day, they are now very collectable. In fact, highly sought after models are now being reproduced.

Vintage 1960's Teisco Spectrum 5 Guitar

The cream of the crop was certainly the Spectrum 5:

This model was a massive achievement on many levels: deep german carved body, stereo pickups and switching, wild colored switches and a crazy body contour. So no wonder forty years later that it is the serious collector’s version of a TEISCO, at least three times more valuable than any other model. “So how do you make the rare, rarer??” I asked. Make a Plexiglas version of it, that’s how. Here is where the story gets interesting…

I’ve said it before: one of the cool things about being in this business is the people you meet. I’ve recently come to the following conclusion – If you are really into weird guitars, and you live long enough, you’ll eventually meet every other person on the planet that is into weird guitars.

Vintage 1960's Teisco Plexi Spectrum 5 Guitar

A while back I got an email from one of the worlds best “out there” guitar players – Henry Kaiser. He saw an older article from the My Rare Guitars website that circled around a particularly wierd guitar and was interested in trading something for it. What did Henry have to trade? A Teisco Spectrum. Yes, a Teisco Spectrum is always in the top ten in my “trade-for” list. But wait… this one was a plexi Spectrum!! What the hell??? Apparently they made 100 or so in Japan (where Henry got it earlier in the decade) so I’m guessing not many – if any other than this one – ever made it across the pond.

So goes the lifetime obsession of guitar collecting. Cool things come and go every month, but this one was worth a mention for sure. For the most part, I enjoy the pursuit. Once I get them, I start looking for the next and the initial romantic attraction wanes. As a customer once stated, it is like fishing, catch and release. But sometimes you catch a really big one, and relling it in is so much fun!

Oh, by the way, do yourself a favour and catch up with Henry Kaiser.

Back Catalog Memories: TEISCO Spectrum 5 Plexi Guitar from MyRareGuitars.com

Nathan I. Daniel: Founder of Danelectro

A lot of people know about Danelectro – especially the now-retro-looking electric guitars, which have become collector’s items and have even given rise to that sincerest form of flattery, a company of the same name as the 1940s, 50s and 60s Danelectro, which manufactures reproductions of the original instruments, and another company that also issues reproductions, albeit without the name.

Fewer people, however, know much about Nathan I. Daniel, my dad – and the genius behind Danelectro. Nor is my father’s contribution to the history of electric musical instruments widely known. He was devoid of interest in fame or publicity, and after Danelectro closed down in 1969, he simply got on with his life. As a result, most of what has been written about Danelectro has focused on the appearance of the guitars, right down to the shape of their heads and the style of knobs, pick guards and tuning pegs.

I hope that for the people who admire, collect and play original Danelectro guitars and amplifiers (or the Silvertone and Airline products my dad also created), this tribute will give a new appreciation for these old instruments, because the essence of the Danelectro story is Nat Daniel’s lifetime of innovation.

Early Years

Nathan “Nat” Daniel was born in New York City in 1912, a year to the day after his young parents arrived in the United States, immigrants who had come to this country to escape the anti-Semitism of czarist Russia, which then ruled their Lithuanian birthplace. The younger of my father’s two kid sisters, my Aunt Ray, tells how one of their parents’ first words in English was “learn,” and how, when they were children, their parents would take all three of them around to New York’s many wonderful museums, urging them to “learn.”

Because my father could not yet speak English when he entered school, he had to repeat the first grade. At some point during his second time around, as he later told me, “it was as if someone turned the lights on one day, and suddenly I understood everything.” A bright, mischievous child, hardly a devoted student, he nonetheless went on to skip several grades and graduated from high school ahead of his contemporaries. (My dad often ignored homework assignments but aced exams, much to the irritation of certain teachers – most notably a high school math teacher who wanted to flunk him but couldn’t because of his near-perfect score on the New York State Regents Exam.)

My dad developed an early interest in radio, still in its infancy during his teenage years. He built the first crystal radio set in his neighborhood. During the Great Depression, he dropped out of City College of New York and began assembling and selling amplifiers of his own design. It was during this period, in the mid-1930s, that he designed and began manufacturing a push-pull amplifier circuit that eliminated the input transformer that had made it impossible to achieve good high-frequency response. His amp tested “flat” (i.e., provided equal response across the full range of sound frequencies) to the limit of then-existing equipment. He did not try to patent his invention because he could not afford the expense.

My father’s first “factory” was his bedroom in his parents’ New York apartment. Later he moved his small manufacturing operation – Daniel Electrical Laboratories – to a loft in Lower Manhattan. His first big customer was the well-known guitar maker Epiphone, second only to Gibson at the time.

During World War II, Nat Daniel served as a civilian designer for the U.S. Army Signal Corps at Fort Monmouth, N.J. Among the other problems he worked on at that time, he found a simple, economical way to equip military jeeps and motorcycles with shielding to prevent the electronic “noise” their engines generated from interfering with the reception of critical battlefield radio messages. Protected from the draft by the critical nature of his work, at one point he considered enlisting in the Marines. His boss – and my mother, Mollie – talked him out of it. As a kid, I once asked about his work during the war. His response: “I saved the government a million dollars.” Whatever the exact amount, clearly it was not a trivial sum.

Danelectro

At the end of the war, my father left the Signal Corps and reopened his amplifier manufacturing business in Red Bank, N.J., near Fort Monmouth. He called it the Danelectro Corporation (coined from “Daniel electric”) and over the next nearly two and a half decades produced what writers Jim Washburn and Steve Soest in the July 1983 issue of Guitar World called “an impressive number of electric instruments … distinguished in their design innovations [and] their quality at a budget price….”

After supplying Epiphone again for about a year, he won contracts to make amplifiers for two major national retail chains, Sears Roebuck and Montgomery Ward…

TO CONTINUE READING, PLEASE CLICK HERE: www.pen4rent.com/pen4rent/tribute.aspx

Note: Excerpt, reproduced here with the author’s permission, from a tribute to Nathan I. Daniel by Howard E. Daniel. Copyright © Howard E. Daniel, Pen-For-Rent, 2007-2009. May not be reproduced in whole or in part without the author’s express written permission. The author may be contacted at info@pen4rent.com

Nathan I. Daniel: Danelectro Founder from MyRareGuitars.com

While I spend most of the time in this column writing about very cool pieces that came as they are from budget factories in the 60’s, sometimes a piece begs for modification. Sometimes (adding a Bigsby on anything I can, for instance), the mod is minimal and reversible. Sometimes, a beat up guitar or amp shows up begging for more than a simple mod and they become a kind of Frankenstein’s Monster. Case in point: this Silvertone (Danelectro-made) 1448 (i.e., the one pickup “Amp in Case” guitar).

Danelectro 1448 Electric Guitar Project (Before)

As you can see in the “before” pictures, this one came with no electronics, a smashed in Masonite top and years of major neglect. I grabbed it off Craig’s list for $50, figuring I could at least use the neck. But then, other than the smashed top and no electronics, it seemed like it could be an interesting project on its own—not just a parts donor. What was there to work with/keep? A short but good list:

• One good neck—with Brazilian rosewood we can’t get anymore. Odd to see on such a low rent “cheap” guitar. But Danelectro necks were incredibly study and stayed very straight—which is good, since they didn’t have truss rods, after all. And, it may seem minor, but Dano’s aluminum nut contributes to the tone and is a very cool part.
• One set of tuners. The Dano/Silvertone open back key tuners are not the best ever made but they actually hold tune of the guitar is set up well.
• Original Dano bridge, with the “semi” (emphasis on semi) adjustable rosewood slab for intonation. Or something kinda close to intonation.
• The back of the original guitar and the pieces of wood that all hardware would/could anchor in to. I’m no expert on Danelectros, but the wood used in the Amp-in-Case models (the hollow ones, at any rate, before the solid wood versions of 67 and 68, after the MCA takeover) is usually quoted as pine or poplar. In any case, there’s not much wood in there—enough to anchor a bridge and to hold down the Masonite top.

So what did I need? Electronics and a new top. I had the cracked and beaten old Masonite top, so I used it as a template to cut a new top.

My options were to restore it and find some old Danelectro pickup, if I wanted to keep it original. OR, I could add two lipsticks and make it a custom job, while retaining the materials of the originals.

Or, the option I went with, I could make it a total one-off custom job. A buddy of mine owns a custom car shop and he was headed to a junkyard and then a metal yard and asked if I wanted to come along. Figuring a day at a junkyard and a sheet metal shop were more fun than a day of working on a book, I jumped at the chance.

Along with a bunch of crap I probably didn’t need, I left the yard that day with a nice sheet of brushed aluminum. I used the old, broken top as a template and cut the meal the shape of the top of the guitar. Then I ground down the sides, so no metal would come sharp off the edges.

Danelectro 1448 Electric Guitar Project (After)

On the old Danelectro body, there was about a ¼ inch of wood—perfect for mounting the new metal top with some sheet metal screws, which gave it a cool (to me, at least) industrial look.

Danelectro 1448 Electric Guitar Project (After)

Now for electronics. The first version had some top-mounted old DeArmond Silverfoils off an old Harmony that was broken beyond repair. These sounded ok, but the look wasn’t quite right. So, next, I took off the metal top and cut out its center and mounted a modified after-market loaded Stratocaster pick guard. This took some trimming of the pick guard so it would fit the top properly but, once it did, it looked pretty snazzy. The meal also offered some of the best shielding I’ve EVER heard on a Strat-style guitar. The single coils sounded great with almost no single coil hum or buzz—not even when standing under neon sage lights. Go figure.

And the best thing? Something odd happened when I put the Strat electronics onto the Dano body and neck: the tone became a strange hybrid of both guitars. It sounded sort of like a Strat, but the short scale neck, along with the odd bridge and aluminum nut and (probably the biggest factor) the hollowed-out body made it sound different than any Strat I’d ever heard. It had the twangy jangle and snap of a Dano, but higher output on the pickups. A very cool combo—all for under $100 in parts and a little fun work.

If you’ve got a busted up old Danlelectro, it’s a modification/custom job I’d highly recommend. You’ll have the only one on your block, and it’ll sound pretty darn good, too. Happy hod-rodding!

Odd’s & Mod’s from MyRareGuitars.com

The reason I bring this up is that my friends know me I’m a vintage amp geek. Not only a vintage amp geek, but an oddball vintage amp geek. Where other people pine for a Blackface Fender, I’d rather have a Valco, Dano or Magnatone any day. Except for the Tweed era Fenders, in fact, I’d much rather have any Airline (Valco made) over any Fender amp.

And yet, for a guy who loves obscure amps (I gig often in a PAC-AMP 660…which is really just a re-branded Magnatone 260, but still, I’m usually the only guy in the club with a PAC-AMP), there are a few I SHOULD have been really familiar with, but am not.

So, which amp am I admitting to not have played until recently (although I’ve played it a LOT for the last three months)? The classic Silvertone 1484 (aka one of many different amps known over the years as a Silvertone Twin Twelve).

Silvertone 1484 Guitar Amplifier

One of the true major players in oddball amps, the Silvertone 1484 guitar amp is pretty well known. It’s so well know, that it may not actually qualify as an oddball amp. But it’s still from the great Nat Daniel, the man behind the awesome kings of Masonite and lipstick pickups and wallpaper-as-Tolex’ the Danelectro company, who designed and produced some of the greatest oddball amplifiers ever done.

It’s not like I was unfamiliar with Dano amps. I’ve owned several over the years, including an awesome 4 6V6 powered Challenger, a Champ-killing 1457 Amp in Case, and a classic Tweed Deluxe-sounding 1472. I’d also restored and owned one of the rare 1485’s’ the 4 6L6 head with the cabinet with six ten inch Jensens. This was the model that had languished in its rare pawn shop obscurity until Jack White re-introduced them to the ears of garage-rock fans. Now they cost a trillion dollars, last I checked.

So, I’d had plenty of Danos. But, oddly enough, until I bought one three months ago, I’d never played through the old standby of giggable-power Danelectros: The Silvertone 1484. I got one at a killer price and figured I could tune it up and turn a profit. I don’t know why, but I just assumed it would be an overrated amp (I’d always been a bigger fan of the low wattage 1472 than the higher watt 1485, and I assumed the 1484 would share the strong-but-not-incredible tone of its big brother).

Silvertone 1484 Guitar Amplifier

And now? Now I can’t believe what I was missing out on all those years. This amp has a great, rich, textured clean. It has the distinctive warm, dark sound of all great Danelectros, but it has the ability to get treble and chime in a manner that no other Dano model I’ve played through does.

It’s a standard two channel amplifier with Reverb and Tremolo on channel two. The knobs are interactive, so you can thicken your tone just by playing with the knobs on channel one while you’re plugged into two. Or, you can add significant thickness and grit by bridging the channels with a jumper cable.

If you were to judge this amp on its clean tone and tremolo alone, it would be a keeper. But where it really shines and separates itself from the crowd is when the volume knob is up at Ten O’clock, or higher.

This is the best overdriven amp tone I have ever heard. Without pedals, this is one of the true stunning overdriven amps EVER. In fact, there are only a few amplifiers I’ve ever heard in its class for pedal-free overdrive. Those two? My buddy Ray’s modified Supro Thunderbolt, and my friend Orlando’s 1958 Tweed Deluxe. And the thing that the 1484 and the Thunderbolt share is that they have the power of their 6L6’s with the texture and breakup of a good 6V6 amp (the Tweed Deluxe being head of that class).

And since it’s rumored that Jimmy Page may have snorted some drug off a Thunderbolt before locking away a 14 year old groupie in a closet, using the Thunderbolt to jam the door closed, that amp has become a thousand dollars. Or, wait, did he record the first Led Zep album through a Thunderbolt? Or was that a Coronado? Another model? Well, the Supro Thunderbolt was in a room where Jimmy Page was breathing, surely, at some point, and it’s worth lots of money because playing one will make you more like Jimmy Page (thankfully, this wanting-to-be-like Page thing hasn’t led thousands of old men to start sleeping with 14 year-old groupies).

But, you know, the Supro Thunderbolt, Jimmy Page or no Jimmy Page, DESERVES to be a thousand dollar amp. It’s as good sounding as any of the boutiques I’ve heard, and those two 6L6’s breathing heavy through the 15″ Jensen is a wonderful sound.

The 1958 Tweed Deluxe needs little introduction – nor even a famous person rumored to have played it, and yet it goes for three grand (drink rings and cigarette burns tossed in for free!). Neil Young plays an earlier version of the Tweed Deluxe (and listen to Ragged Glory to get a sense of what one of those sounds like opened up and roaring).

So, for the five hundred to eight hundred these 1484’s are going for, they are still a relative bargain on a vintage amp. They cost less (WAY less, in fact) than a re-issued Bassman, for instance and they blow those away for tone. You would have to go the hand wired boutique route (which is a route worth going down – support these modern amp makers!) to get this kind of tone.

The overdrive in a 1484 is rich and complex. Deep, driving and with a sweet, singing sustain. And it cleans up VERY well when you roll off the volume on the guitar. Really, there’s no amp I’ve ever played (or heard) quite like it for touch and response.

And, the head tucks into the back (how cool is THAT design)? I run mine with its head into a single 12″ cab for small gigs and into its own twin twelve (Jensens) for larger shows. Adding this amp to a really efficient speaker (like the Private Jack – thanks, Don!) is an amazing experience. A lot of these old amps (Lectrolabs, Silvertones, and Valcos) are losing a LOT of their voice due to tired old speakers. Trying a new speaker, whether a copy of its original Jensen Alnicos, or a more Celestion-voiced highly efficient ceramic (like the Eminence Private Jack), is a cheap, easily reversible mod with a vintage amp that can really take it to gigging heights.

All this and Tremolo and Reverb, too! Actually, all this and Tremolo, too. The “Reverb” that comes with this is truly awful. It’s also some weird noise that is not, let’s be clear, like any reverb you’ve ever heard. It sounds like your reverb But, this isn’t a surf amp, and you’re not Dick Dale (unless of course you are Dick Dale – hey, it’s possible – Hi, Dick! Not the amp for you). For making noise in the garage (or bar or studio), there may not be a better amp out there. Go get yours now. Yes, they were two hundred bucks 5 years ago and there a lot more now. So what? They’re still worth it. The Silvertone 1484 is a tone monster.

Silvertone 1484 Guitar Amplifier from MyRareGuitars.com

1968 Danelectro Sears Silvertone Electric Guitar

These were cheap, crap box guitars made at a price point to that every kid who saw the Beatles on Ed Sullivan could get one for whatever holiday or birthday was next. They were product, churned out at an alarming rate. They were also, lucky for us, pretty damn cool sounding little guitars.

So, a “rare Silvertone” is a bit of an oxymoron. The best Michael Bay film. A tall jockey. The thinnest sumo wrestler. The most competent politician in Washington. The least annoying morning DJ, and so on.

But by 1968, the post-Beatle guitar boom of 64-66 had waned. The wave had crested and you started to see some of the biggest names in little guitars (Kay, Valco, Danelectro) starting to suffer and, within a year, all die quiet deaths. (Chicago enormo-manufacture Harmony would slump on into the early 70’s before limping to a public auction death knell in 1975).

1968 Danelectro Sears Silvertone Electric Guitar

In their last years, all of these companies would make some changes, hoping desperately to cling to their former market share. In Dano”s case, the biggest change when ownership switched hands to MCA in 1966 was the end of the poplar and Masonite guitars that had so defined the Neptune maker”s sound for over ten years. The last year and a half, Danelectro produced actual WOOD guitars, the top of the line being the classic 3 pickup Vinnie Bell signature model with the wonderfully psychedelic pickguard and the zippy quick neck.

The bottom of the line? The wood one-pickup Silvertone model from the Amp-in-Case line. This was still called the 1448 in the 1968 SEARS catalog, but it is a slightly different sounding little beast from its earlier and more prevalent semi-hollow 1448’s. The AC/DC (sans power transformer) amp in the case is the same (not nearly as cool at the great 1457’s single-ended 6V6-driven amp with tremolo. BUT, this guitar is arguably a better little axe than its predecessors. It’s at least as good and different enough that you should get one if you can.

It’s a killer blues and garage guitar. The skate key tuners hold surprisingly well, so long as you drop some graphite (or the lube of your choice) on the sticky, but great sounding, aluminum nut. The rosewood bridge is just like on the older models… simple, but effective. And, of course, the key to the tone is still there – the brilliant lipstick tube low-output (with plenty of volume…ohms ratings and volume are not the same) Danelectro pickup is worth all of the hype it receives. There’s just nothing quite like them, and if you want that full voiced twang and snap…well, you need an original lipstick Dano. There is truly no substitute.

1968 Danelectro Sears Silvertone Electric Guitar

And in a wooded solidbody, rather than the more common (and great, make no mistake) hollow Masonite-topped models, the pickup really shines. Crank your amp and turn up the guitar volume for some great smooth overdrive. Roll back the volume knob and the guitar cleans up, while retaining its treble response (unlike many great vintage garage guitars like Harmonys, which get muddy and murky very fast with their original volume knobs turned down at all). This is a clear, clean and articulate tone monster that responds well to every amp in the house (at least in this house of too many amps, it does).

The short scale makes for easy playing, smooth bends and surprisingly good intonation up the neck when set up well. Plus, this model, like later Danos, has a very cool, very figured fretboard for a “budget” instrument. And, of course, it comes, like its older Masonite siblings, in a wonderfully cheesy black metaflake finish.

This is one pawn shop surprise you should pick up when and if you see it. Like I said, they’re rare – or they’re “Silvertone Rare” at any rate. They show up on eBay a LOT less often than the standard, more common 1448’s, so if you see one in good playable shape, do yourself a favor and dig this last-of-the-breed from Neptune.

1968 Danelectro Sears Silvertone Electric Guitar from MyRareGuitars.com

So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:

1. I wanted a small, easy to carry amp that screamed at relatively low volumes.
2. I didn’t want to spend much money (I’m a cheap bastard…part of me thinks I could never truly love a 59 Bassman unless I scored it at a yard sale for a hundred bucks. Now, tone matters more than money to me, but I tend to love the tone of crappy amps just as much as high enders, so I’d feel like a stooge dropping that kind of money on an amp. Especially since I play them and would ruin the collectable value of anything by gigging with it).
3. It needs to be an amp that another guitar player would say, “What the fuck is that?

1940s Fidelity Amplifier

So what did I buy? A late 1940’s FIDELITY, of course. Haven’t heard of FIDELITY? Me, neither. But it met the needs. It was very light an easy to carry. As for meeting my volume needs…it was VERY quiet. Dead quiet. As in, silent. So, that part needed some work. Sixty bucks. Not bad. Less than an assembly-line stomp box. It looked like a 50’s space heater in crap brown with tootsie roll brown and vanilla cream paint and chicken head knobs. Score, Daddio

When it showed up, my wife shook her head. This can be a good sign or a bad sign…it depends on how it turns out down the road. Sometimes, I fix these things up and make lots of money and buy her a new bass. Sometimes, I lose money and crap piles up in the garage. I try to remind her often of the former and play down the latter as much as possible.

1940s Fidelity Amplifier

Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.

1940s Fidelity Amplifier

Quirks? Some. The old Rola was kind of tired, so I saved it and put in a new Jensen Mod I had laying around (not a bad little speaker, but not a vintage Jensen, either…expect a future upgrade). The 7F7’s are supposed to be very loud and micro-phonic (which was why we don’t tend to see them in guitar amps after the mid-late 40’s), but this one sounds just fine. And they’re cheap, so it’s not like you’re hunting down good EL86’s or anything. Also, one thing that took some getting used to was the tone knob is backwards by contemporary standards. That is, turn the creamy chickenhead to the left, you get more treble (and more drive and volume). Turn to the right, and it gets very bassy and like a chewy jazzy tone.

The other cool thing about these old non-collectable brands? A modification isn’t sacrilege. I added a “speaker out” jack to drive a bigger cab (using a practice amp cranked through 4X12’s is too much fun…a little amp can move a lot of air in a big cab) and a “line out” jack to use this as a pre-amp with a bigger power amplifier at shows.

1940s Fidelity Amplifier

Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.

Rob’s Crazy eBay Finds: 1940’s Fidelity Amplifier from MyRareGuitars.com

Sears Catalog: Silvertone Guitars from Sears

Sears began selling a selection of electric guitars and amps in the fifties, but it is the 1960s that the company sold most of its more popular models. Silvertone was the house name used by Sears for their instruments but these were actually made for Sears by several manufactures including Danelectro, Harmony and Kay. Of course, Sears had their low end and their high end instruments but for the most part they sold some really great guitars and amps at comparatively budget prices. A Fender Strat in 1964 cost $275 compared to the most expensive Silvertone guitar of that time at $199 including case. Putting things in perspective with inflation though, even a guitar costing $100 in the mid 60s would run you a bit over $600 today.

We were all very happy to have our first guitar but play in a band with a Silvertone wasn’t always considered “cool” and most of us got rid of our Sears gear in favor of something else has soon has we had enough money. And, most of us now really regret doing so. In the last several years Silvertones have enjoyed a boom in popularity among both collectors and performers. There are whole web communities devoted to Silvertone instruments. And, as it goes, availability for these instruments is declining while prices for them are escalating.

Sears Silvertone Guitars 1963 Catalog

Opening the pages that feature guitars and amps from a Sears 1963 Fall & Winter catalog reveal a virtual vintage wonderland. The top of the page shows the two infamous Danelectro made guitars with “Amp-In-Case” models 1448 (single pickup) and 1449 (double pickup). These Mosrite shaped guitars had the chambered bodies, lipstick pickups, stacked tone & volume controls and were constructed of masonite. The tube powered amps built into the case were 3 and 5 watts with 5 inch and 8 inch speakers respectively. The larger amp even had tremolo and both shipped with a “How To Play” 45 rpm record. These sold for $67.95 and $99.95 in 1963. Today, a single pickup model in rough but working condition can run around $300. The double pickup model if near mint can cost well over a grand.

Several other guitars are below the Danelectro models including the popular Harmony made “Jupiter” model #1423 at $79.95 and the two Harmony “Rocket” like semi hollowbody models. The double pickup model # 1446 with black finish sold for $149.95 and the Silvertone flagship model # 1454 in red sunburst sold for $189.95 including case and featured 3 DeArmond pickups with separate on/off toggles for each. Both of these models were also equipped with a genuine Bigsby vibrato. One of the 1454 models in good condition recently sold on EBAY for over $800, still a good buy!

In addition to the Danelectro U1 bass guitar model #1444 at $79.95 with case, the page opposite the guitars features the wonderful tube powered Danelectro amps. These run from the little 3 watt “Meteor” amp #1430 at $22.95 to the monster 120 watt half stack with 6 -10 inch Jensen speakers, tremolo and an unusable reverb selling for $239.95. This model #1485 is the one made popular by Jack White of the White Stripes. Also on this page is the 15 watt combo with a 12 inch speaker # 1482 at $68.95 and the bass amp #1483 with 23 watts and a 15 inch Jensen. And then there is the most popular model, the piggy-back 1484 at $149.95 with 60 watts, two channels and two 12 inch Jensens. One of these in good condition can be had today for between $450 and $700.

We all know that regardless of how much you spend on a new guitar, it is not going to sound quite like a 40 year old instrument. If you want a good vintage guitar and don’t want to take out a second mortgage to get one, Silvertones are a good choice. Collectors looking for s Silvertone in near mint condition should be ready to get deep into their pockets. However, if you are actually looking for a guitar to play and/or record with and you are not to concerned with cosmetic issues, about $200 will land you any number of nice Silvertone models. Just keep an eye on the late night auctions and frequently check out the pawn shops and garage sales. If you are a serious musician you should plan on possible replacing the tuning gears and maybe the bridge as these usually were sub-standard on even the most expensive models. If you going to gig with your vintage Silvertone, at least buy a descent case. The stock cases for Silvertone were made of chipboard. If you are one of us that owned a Silvertone and sold or gave it away just remember the words of Joni Mitchell, “Don’t it always seem to go that you don’t know what you got till its gone”.

Post by: Tom Bergey

In Praise of Sears Silvertone Guitars from MyRareGuitars.com

I have been collecting guitars for 25 years. Although I have had many different guitars over the years, my preference is for Vintage guitars, which makes eBay a good place to trade because of the wide audience. So consequently you are probably reading this because you saw one of my guitars for sale on eBay. Welcome!

So, what’s up with the phrase, Even Better Than the REAL Thing!???? Read on…..

In Search of Mosrite: The Mosrite Ventures Model circa. 1987

For the past few years I had been looking for a really nice Mosrite Ventures Model Vintage guitar. Prices ranged from $1,500 to $4,000 depending on the year and the condition. Last year an angel descended on eBay with 35 NOS Mosrite guitars that were built in 1987. These guitars were all brand new and were never sold. They were stored in a warehouse for 14 years. Unbelievable! They were auctioned off one by one, week after week, until they were all gone. I bought the 13th one that sold. I was not disappointed.

1987 Mosrite Ventures Model Electric Guitar NOS

The first day I stared at it, the second day I touched it and on the third day I played it. The fourth day I told the family. The fifth day I told the neighbors. The sixth day, everyone came to look at it. The seventh day I rested. What an incredibly beautiful guitar! In fact, I soon realized that it was TOO beautiful! How could I risk pulling it out of the case every day and playing it? It was like having a bad addiction! I needed a fix! It drove me crazy to know that it sat right over there in the corner, taunting me, yet at the same time I could not risk opening the case for fear of damaging such a wonderful instrument! I needed a solution. Then it hit me… Buy a REALLY nice reproduction Mosrite that I could play everyday! EBAY on: search: MOSRITE.

1970's Univox Mosrite Ventures Reproduction Guitar

I started with this UNIVOX pictured above. Nice looking copy but the neck was typical of any reproduction 1970’s guitar and anyone who has played a Mosrite knows, the neck is what it is all about. Next I tried a Teisco model (below).

Reproduction Teisco Mosrite Ventures Model Guitar

Much better quality than the Univox, much better neck, and a good deal for a $300-$400 vintage guitar, but I decided to keep looking.

1970's Silvertone Mosrite Ventures Model Guitar

This is an early seventies Silvertone. A two notches below in looks, one notch above in feel, but not quite there yet. I also found another Silvertone, different headstock, body a little smoother, similar neck with a white pickguard. I suspect this one was makde by Kawai in the early seventies. Curious how the body and headstock are different, but all the hardware is identical! Here it is…

1970's Silvertone Mosrite Ventures Model Guitar (Kawai)

So, after a significant amount of research, and a great deal of time justifying the outrageous price, I purchased the Japanese made reproduction Mosrite, the one with the “excellent” tailpiece. Here is a picture….

1970's Japanese Reproduction Mosrite Ventures Model Guitar

This guitar retails for $1695 and you can get them for around $1000. Pretty pricey for an reproduction Vintage guitar, I must say. Anyway, I’ll be damned if this Japanese Mosrite isn’t one of the nicest guitars I have ever owned! It looks GREAT, the neck feels GREAT and dare I say, it even sounds BETTER than the 1987 Mosrite! Brighter, crisper, it sounds just GREAT. All of this is fine with me because after all, it is NOT a real Mosrite. No sir, I have one of those over there in the corner. The REAL Mosrite is not for playing, so it doesn’t matter anymore what it feels like and what it sounds like, it only matters what it LOOKS like. And so it should be. Who in their right mind would start bashing away on an instrument that can never be replaced? So, when I looked at the situation in this light, it occured to me that the Japanese guitar is arguably… Even Better Than the REAL Thing!

…and so started my quest.

I don’t think I would ever part with the ’87 Mosrite, but I think I have found a way to live with my addiction, and that is to supplement my real Vintage Guitars…. with guitars that feel, look and sound really good, but at a price point that makes it a no-brainer. It’s almost like buying insurance for the ’87 Mosrite. Now I am not playing it as often as I normally would and consequently I’m maintaining the integrity of the Vintage instrument and allowing it to appreciate.

Since then, I’ve been on a quest to find the ultimate in reproduction Vintage guitars that are qualified to add to the list. In so doing, with my efforts and those of others, I hope that this page can serve as a tool for people that are looking for “everyday player” guitars to supplement their Vintage Collection and also for people who would never buy a Vintage Guitar but want The Ultimate Reproduction Vintage Guitars on the Planet.

Please send along your Even Better Than the REAL Thing! guitar stories, along with pictures if possible, and I will include them. Here are a few examples:

Coral Hornet 1960’s

Vintage 1960's Coral Hornet Electric Guitar

For me, love at first sight. A while back I found one in San Diego. That is a picture of it above, a beauty. Unfortunately they wanted $2,000 for it. They probably still have it today. I’ve played one and they are a lot better looking than playing, primarily because the tailpiece is lousy. The intonation cannot be adjusted because it is a vibrato tailpiece with a piece of wood for a bridge that slides around. Every time you change the strings, you wrestle with it to keep it in tune. That aside, I could not get it out of my mind, so I found one on EBAY that had been refinished and needed a little TLC. With a little work, about $200 in parts (Bigsby and Tune-o-matic bridge) and a few hours of guitar love, I ended up with a real nice looking (some say wierd!?)AND a really nice playing 60’s Coral Guitar. The Gibson Bridge combined with the Bigsby Vibrato make this a NICE player. Stays perfectly in tune for days. Compared to an original at $2000, this one cost about $350. Here is a picture of it:

Vintage 1960's Coral Hornet Electric Guitar (Refinished)

Comments from Buyer: “Whooo–it got here! I was jumping up and down, and I was so excited that I dragged it over to a friend’s house last night. Thanks SO much!!!” Ann from CA.

In Search of Mosrite: 1987 Mosrite Ventures Model Guitar from MyRareGuitars.com